Features: • Maximum ratings -Power-supply voltage Vcc: 24 V -Operating junction temperature Tjopr: 40 to 125• Electrical characteristics -VREF output voltage VREF: 5.0 V ± 3% -UVLO operation start voltage VH: 10.5 ± 0.7 V -UVLO operation stop vol...
HA16178P: Features: • Maximum ratings -Power-supply voltage Vcc: 24 V -Operating junction temperature Tjopr: 40 to 125• Electrical characteristics -VREF output voltage VREF...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: ·Wide operational supply voltage range (VCC = 6 to 40 V)·Various control signals are gen...
Features: ·Wide operational supply voltage range (VCC = 6 to 40 V)·Various control signals are gen...
Item | Symbol | Ratings | Unit | Note |
Supply voltage | VCC | 24 | V | |
OUT peak current | Ipk-out | ±1.0 | A | 3 |
OUT DC current | Idc-ou | ±0.1 | A | |
Terminal voltage | Vi-group1 | 0.3 to Vcc | V | 4 |
Vi-group2 | 0.3 to Vref | V | 5 | |
CAO voltage | Vcao | 0.3 to Vcaoh | V | |
EO voltage | Veo | 0.3 to Veoh | V | |
PFC-ON voltage | Vpfc-on | 0.3 to +6.5 | V | |
PFC-ON clamp current | Ipfc-on-clamp | 300 | A | |
RT current | Irt | 200 | A | |
CT current | Ict | ±800 | A | |
IAC current | Iiac | 1 | mA | |
CS voltage | Vi-cs | 1.5 to 0.3 | V | |
VREF current | Io-ref | -5 | mA | |
Power dissipation | Pt | -1 | W | 6.7 |
Operating junction temperature | Tj-opr | 40 to 125 | ||
Storage temperature | Tstg | 55 to 150 |
The HA16178P/FP is a power-factor correction (PFC) controller IC.
This HA16178P/FP IC adopts continuous conduction mode as PFC operation.
Various functions of HA16178P/FP such as over voltage detection, over current detection, soft start, feedback loop disconnection detection, are incorporated in a single chip. This eliminates a significant amount of external circuitry.
HA16178P/FP PFC operation can be turned on and off by an external control signal. By using this function, PFC operation can be disabled at low input voltage, allowing remote control from the secondary side. A soft-start control pin provides for the easy adjustment of soft-start operation, and can be used to prevent overshooting of the output voltage.