GS9065

Description


The GS9065 Multi-Rate Serial Digital Reclocker is designed to automatically recover the embedded clock signal and re-time the data from a SMPTE 259M or SMPTE 344M compliant digital video signal.

The GS9065 removes the high frequency jitter components from the bit-serial stream. Input termination is on-chip for seamless matching to 50 Ohm transmission lines. An LVPECL compliant output interfaces seamlessly to the GS9068 Cable Driver.

In Auto Mode, the GS9065 automatically detects and locks onto an incoming SMPTE SDI data signal from 143Mb/s to 540Mb/s. The GS9065 requires only one external crystal to set the VCO frequency.

The ASI/177 input pin of GS9065 allows for manual selection of support of either 177Mb/s or DVB-ASI inputs.