GS9005A

Features:

• automatic cable equalization (typically 300m of high quality cable at 270Mb/s)
• fully compatible with SMPTE 259M and operational to 400 Mb/s
• adjustment free receiver when used with the GS9000B or GS9000S
   decoder and GS9010A Automatic Tuning Sub-system
• signal strength indicator
• selectable cable or direct digital inputs
• 28 pin PLCC packaging


Application

•  4ƒSC, 4:2:2 and 360 Mb/s serial digital interfaces


Pinout




Specifications

PARAMETER	VALUE
Supply Voltage	5.5 V
Input Voltage Range (any input)	VCC+0.5 to VEE-0.5 V
DC Input Current (any one input)	5 mA
Power Dissipation	750 mW
Operating Temperature Range	0°C TA 70°C
Storage Temperature Range	-65°C TS 150°C
Lead Temperature (soldering, 10 sec)	260°C

Description

The GS9005A is a monolithic IC designed to receive SMPTE 259M serial digital video signals. This device performs the functions of automatic cable equalization and data and clock recovery.   It interfaces directly with the   GENLINX™ GS9000B or GS9000S decoder, and GS9010A Automatic Tuning Subsystem.

The VCO centre frequencies of GS9005A are controlled by external resistors which can be selected by applying a two bit binary code to the Standards Select input pins.

An additional feature of GS9005A is the Signal Strength Indicator output which provides a 0.5V to 0V analog output relative to VCC indicating the amount of equalization being applied to the signal.

The GS9005A is packaged in a 28 pin PLCC operating from a single +5 or -5 volt supply.