Features: ·3.3V, 5V, 12V and Adjustable output versions·Adjustable version output voltage range 1.23V to 37V 4% max over line and load conditions·3A output current·Input voltage range up to 40V·Requires only 4 external components·High efficiency·TTL shutdown capability, low power standby mode·Ther...
GM7230: Features: ·3.3V, 5V, 12V and Adjustable output versions·Adjustable version output voltage range 1.23V to 37V 4% max over line and load conditions·3A output current·Input voltage range up to 40V·Requ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: ·3.3V, 5V, 12V and Adjustable output versions·Adjustable version output voltage range 1....
Features: ·PC100,PC66 Compatible 7K(2-2-2), 7J(3-2-2), 10K(PC66)·3.3V single Power supply·LVTTL in...
Features: * PC133/PC100/PC66 Compatible -7(143MHz)/-75(133MHz)/-8(125MHz) -7K(PC100,2-2-2)/-7J(PC1...
Rating | Value | Unit |
Maximum Supply Voltage | 45 | V |
ON/OFF Pin Input Voltage | -0.3 V +25 | V |
Output Voltage to Ground (Steady State) | -1.0 | V |
Power Dissipation | Internally Limited | |
Storage Temperature Range | -65 to + 150 | °C |
Maximum Junction Temperature | +150 | °C |
Operating Temperature Range | -40 TJ 125 | |
Minimum ESD Rating (C=100pF, R=1.5kW) | 2 | kV |
Lead Temperature (Soldering, 10 sec.) | +260 | °C |
The GM7230 series of regulators provide all the active functions for a step-down (buck) switching regulator, and drive 3A load with excellent line and load regulation. GM7230's are available in fixed output voltages of 3.3V, 5V, 12V, and a Adjustable output version.
These regulators of GM7230 are simple to use and require a minimum number of external components. Features include internal frequency compensation and a fixed-frequency oscillator.
The GM7230 series are high-efficiency replacements for popular three-terminal linear regulators, requiring a smaller heatsink or even no heatsink.
The GM7230's perform well with standard inductors from several manufacturers, simplifying the design of switchmode power supplies. The GM7230 series guarantee ±4% tolerance on output voltage within specified input voltages and output load conditions, and ±10% on the oscillator frequency. External shutdown is included, with 80 A (typical) standby current. The output switch has cycle-by-cycle current limiting, as well as thermal shutdown for full protection under fault conditions.