FSTD16211MTD

The FSTD16211MTD is designed as 24-bit bus switch with level shifting which provides high speed CMOS TTL-compatible bus switching. The low of FSTD16211MTD on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. A diode to Vcc has been integrated into the circuit to allow for level shifting between 5V inputs and 3.3V outputs.

FSTD16211MTD has five features. (1)4 switch connection between two ports. (2)Minimal propagation delay through the switch. (3)Low lcc. (4)Zero bounce in flow-through mode. (5)Control inputs compatible with TTL level. Those are all the main features.

Some absolute maximum ratings of FSTD16211MTD have been concluded into several points as follow. (1)Its supply voltage would be from -0.5V to +7.0V. (2)Its DC switch voltage would be from -0.5V to +7V. (3)Its DC input control pin voltage would be from -0.5V to +7V. (4)Its DC input diode current would be -50mA. (5)Its DC output would be 128mA. (6)Its DC Vcc/GND current would be +/-100mA. (7)Its storage temperature range would be from -65°C to 150°C. (8)Its recommended power supply operating would be from 4.5V to 5.5V. (9)Its recommended input voltage would be from 0V to 5.5V. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some electrical characteristics of FSTD16211MTD are concluded as follow. (1)Its clamp diode voltage would be max -1.2V. (2)Its high level input voltage would be min 2.0V. (3)Its low level input voltage would be max 0.8V. (4)Its input leakage current would be max +/-1.0uA at Vcc=5.5V and it would be max 10uA at Vcc=0V. (5)Its off-state leakage current would be max +/-1.0uA. (6)Its switch on resistance would be typ 4 and max 7 with conditions of Vin=0V and Iin=64mA and it would be typ 35 and max 50 with test conditions of Vin=2.4V and Iin=15mA. And so on. If you have any question or suggestion or want to know more information about FSTD16211MTD please contact us for details. Thank you!