FSAM50SM60A

Configuration :
Collector- Emitter Voltage VCEO Max :
Maximum Gate Emitter Voltage :
Continuous Collector Current at 25 C :
Maximum Operating Temperature :
Packaging : Tube
Power Dissipation : 100 W
Package / Case : SPM32-AA
Collector-Emitter Saturation Voltage : 2.4 V
Gate-Emitter Leakage Current : 100 W


Features:

• UL Certified No. E209204
• 600V-50A 3-phase IGBT inverter bridge including control ICs for gate driving and protection
• Divided negative dc-link terminals for inverter current sensing applications
• Single-grounded power supply due to built-in HVIC
• Typical switching frequency of 5kHz
• Built-in thermistor for over-temperature monitoring
• Isolation rating of 2500Vrms/min.
• Very low leakage current due to using DBC (Direct Bonded Copper) substrate
• Adjustable current protection level by varying series resistor value with sense-IGBTs




Application

• AC 100V ~ 253V three-phase inverter drive for small power ac motor drives
• Home appliances applications like air conditioners drive system




Specifications

Inverter Part

Item	Symbol	Condition	Rating	Unit
Supply Voltage	VDC	Applied to DC - Link	450	V
Supply Voltage (Surge)	VPN(Surge)	Applied between P- N	500	V
Collector-emitter Voltage	VCES		600	V
Each IGBT Collector Current	± IC	TC = 25°C	50	A
Each IGBT Collector Current	± IC	TC = 100°C	25	A
Each IGBT Collector Current (Peak)	± ICP	TC = 25°C , Under 1ms pulse width	100	A
Collector Dissipation	PC	TC = 25°C per One Chip	100	W
Operating Junction Temperature	TJ	(Note 1)	-20 ~ 125	°C

Control Part

Item	Symbol	Condition	Rating	Unit
Control Supply Voltage	VCC	Applied between VCC(UH), VCC(VH), VCC(WH) - COM(H), VCC(L) - COM(L)	20	V
High-side Control Bias Voltage	VBS	Applied between VB(U) - VS(U), VB(V) - VS(V), VB(W) - VS(W)	20	V
Input Signal Voltage	VIN	Applied between IN(UH), IN(VH), IN(WH) - COM(H) IN(UL), IN(VL), IN(WL) - COM(L)	-0.3 ~ VCC+0.3	V
Fault Output Supply Voltage	VFO	Applied between VFO - COM(L)	-0.3 ~ VCC+0.3	V
Fault Output Current	IFO	Sink Current at VFO Pin	5	mA
Current Sensing Input Voltage	VSC	Applied between CSC - COM(L)	-0.3 ~ VCC+0.3	V

Total System

Item	Symbol	Condition	Rating	Unit
Self Protection Supply Voltage Limit (Short Circuit Protection Capability)	VPN(PROT)	Applied to DC - Link, VCC = VBS = 13.5 ~ 16.5V TJ = 125°C, Non-repetitive, less than 6µs	400	V
Module Case Operation Temperature	TC	Note Fig. 2	-20 ~ 100	°C
Storage Temperature	TSTG		-20 ~ 125	°C
Isolation Voltage	VISO	60Hz, Sinusoidal, AC 1 minute, Connection Pins to Heat-sink Plate	2500	Vrms

Thermal Resistance

Item	Symbol	Condition	Min.	Typ.	Max.	0Unit
Junction to Case Thermal Resistance	Rth(j-c)Q	Inverter IGBT part (per 1/6 module)	-	-	1.0	°C/W
	Rth(j-c)F	Inverter FWDi part (per 1/6 module)	-	-	1.5	°C/W
Contact Thermal Resistance	Rth(c-f)	Ceramic Substrate (per 1 Module) Thermal Grease Applied (Note 3)	-	-	0.06	°C/W

Product	Product status	Eco Status	Pricing*	Package type	Leads	Packing method	Package Drawing	Package Marking Convention**
FSAM50SM60A	Full Production	RoHS Compliant	$44.40	SPM32-CA	32	RAIL	TBD	Line 1: $Y (Fairchild logo) Line 2: FSAM50SM60A Line 3: &H&E&E&E&E&E&3

* Fairchild 1,000 piece Budgetary Pricing

** A sample button will appear if the part is available through Fairchild's on-line samples program. If there is no sample button, please contact a Fairchild distributor to obtain samples

Package marking information for product FSAM50SM60A is available. Click here for more information .

Description

FSAM50SM60A is an advanced smart power module (SPM) that Fairchild has newly developed and designed to provide very compact and low cost, yet high performance ac motor drives mainly targeting medium speed low-power inverter-driven application like air conditioners. FSAM50SM60A combines optimized circuit protection and drive matched to low-loss IGBTs. Highly effective short-circuit current detection/ protection is realized through the use of advanced current sensing IGBT chips that allow continuous monitoring of the IGBTs current. System reliability is further enhanced by the built-in over-temperature and integrated under-voltage lock-out protection. The high speed built-in HVIC provides opto-coupler-less IGBT gate driving capability that further reduce the overall size of the inverter system design. In addition the incorporated HVIC facilitates the use of singlesupply drive topology enabling the FSAM50SM60A to be driven by only one drive supply voltage without negative bias. Inverter current sensing application can be achieved due to the devided nagative dc terminals.

Parameters:

Technical/Catalog Information	FSAM50SM60A
Vendor	Fairchild Semiconductor
Category	Integrated Circuits (ICs)
Applications	AC Motor Driver, 3 Phase
Number of Outputs	1
Voltage - Supply	13.5 V ~ 16.5 V
Voltage - Load	300 V ~ 400 V
Current - Output	50A
Operating Temperature	-20°C ~ 100°C
Package / Case	SPM32CA
Packaging	Tube
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	FSAM50SM60A FSAM50SM60A