FMS72510

Stresses greater than those listed in the table may cause permanent damage to the device. These represent a stress rating only.

Operation of the device at these or any other conditions above those specified in the operating sections of this specification is not implied. Maximum conditions for extended periods may effect reliability.

FMS72510 is a zero delay clock buffer designed for high fan out applications. It contains 11 outputs. FMS72510 provides precise phase and frequency alignment between incoming clock and the output clocks. This makes it ideal for high speed application in the range of 25 to 140 MHz. The Phase Locked Loop is capable of tracking incoming clock modulation of up to ±1% of the clock period. With the exception of FBOUT, the output Enable (OE) pin, when pulled low, will force the outputs to logic low.