Features: • PC-133 Spread Spectrum Compliant• Frequency Range of 25 to 140 MHz• VDD Range of 3.0 to 3.6 Volts• Up to 11 outputs• Less than 100 pS of Output to Output Skew• Less than 90 pS of Cycle to Cycle Jitter• Output Enable pin• Integrated Dampin...
FMS72509: Features: • PC-133 Spread Spectrum Compliant• Frequency Range of 25 to 140 MHz• VDD Range of 3.0 to 3.6 Volts• Up to 11 outputs• Less than 100 pS of Output to Output Sk...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $1.25 - 2.12 / Piece
Processors - Application Specialized Int Controller for Ballast
Symbol | Parameter | Ratings | Units |
VDD, VIN | Voltage on any pin with respect to ground | 0.5 to 7.0 | V |
TSTG | Storage Temperature | 65 to 150 | |
TB | Ambient Temperature | 55 to 125 | |
TA | Operating Temperature | 0 to 70 |
Stresses greater than those listed in the table may cause permanent damage to the device. These represent a stress rating only.
Operation of the device at these or any other conditions above those specified in the operating sections of this specification is not implied. Maximum conditions for extended periods may effect reliability.
FMS72509 is a zero delay clock buffer designed for high fan out applications. It contains 10 outputs. It provides precise phase and frequency alignment between incoming clock and the output clocks. This makes it ideal for high speed application in the range of 25 to 140 MHz. The Phase Locked Loop of FMS72509 is capable of tracking incoming clock modulation of up to ±1% of the clock period. With the exception of FBOUT, the output Enable (OE) pin, when pulled low, will force the outputs to logic low.