EL5283C

Features:

• 8ns typ. propagation delay
• 5V to 12V input supply
• +2.7V to +5V output supply
• True-to-ground input
• Rail-to-rail outputs
• Active low latch
• Single available (EL5181C)
• Quad available (EL5481C & EL5482C)
• Pin-compatible 4ns family available (EL5x85C, EL5287C & EL5486C)


Application

• Threshold detection
• High speed sampling circuits
• High speed triggers
• Line receivers
• PWM circuits
• High speed V/F converters


Pinout




Specifications

Analog Supply Voltage                             (VS+ to VS-) +13.2V
Digital Supply Voltage                                 (VSD to GND) +7V
Differential Input Voltage          [(VS-) -0.2V] to [(VS+) +0.2V]
Common-mode Input Voltage   [(VS-) -0.2V] to [(VS+) +0.2V]
Latch Input Voltage -0.2V to                             [(VSD) +0.2V]
Storage Temperature Range                     -65°C to +150°C
Ambient Operating Temperature                 -40°C to +85°C
Operating Junction Temperature                                 125°C
Power Dissipation See Curves


Description

The EL5283C comparator is designed for operation in single supply and dual supply applications with 5V to 12V between VS+ and VS-.For single supplies, the inputs can operate from 0.1V below ground for use in ground-sensing applications.
The output side of the comparators can be supplied from a single supply of 2.7V to 5V. The rail-to-rail output swing enables direct connection of the comparator to both CMOS and TTL logic circuits.
The latch input of the EL5283C can be used to hold the comparator output value by applying a low logic level to the pin.
The EL5283C contains two comparators set up as a window comparator. A single input is compared with a high and low reference. When the output goes beyond one of these reference signals, the relevant output goes high.
The EL5283C in the 10-pin MSOP package and is specified for operation over the full -40°C to +85°C temperature range. Also available are a single (EL5181C) and quad versions (EL5481C and EL5482C).