EL5202

Features:

Operates off 3V, 5V, or ±5V applications
Power-down to 0µA (EL5x02)
-3dB bandwidth = 400MHz
±0.1dB bandwidth = 50MHz
Low supply current = 5mA
Slew rate = 3500V/µs
Low offset voltage = 5mV max
Output current = 140mA
AVOL = 2000
Diff gain/phase = 0.01%/0.01°
Pb-Free plus anneal available (RoHS compliant)




Application






Pinout

Specifications

Supply Voltage between VS+ and GND . . . . . . . . . . . . . . . . . 13.2V
Maximum Supply Slewrate between VS+ and VS- . . . . . . . . . 1V/µs
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±VS
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±4V
Maximum Continuous Output Current . . . . . . . . . . . . . . . . . . .80mA
Maximum Current into IN+, IN-, CE . . . . . . . . . . . . . . . . . . . . .±5mA
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Curves
Storage Temperature Range. . . . . . . . . . . . . . . . . -65°C to +150°C
Ambient Operating Temperature Range . . . . . . . . . -40°C to +85°C
Operating Junction Temperature. . . . . . . . . . . . . . . . . . . . . . .150°C




Description

The EL5x02 and EL5x03 families represent high-speed VFAs based on a CFA amplifier architecture. This gives the typical high slew rate benefits of a CFA family along with the stability and ease of use associated with the VFA type architecture. With slew rates of 3500V/s, this family of devices enables the use of voltage feedback amplifiers in a space where the only alternative has been current feedback amplifiers. This EL5x02 and EL5x03 family will also be available in single, dual, and triple versions, with 200MHz, 400MHz, and 750MHz versions. The EL5x02 and EL5x03 are all available in single, dual, and triple versions. Both families operate on single 5V or 5V supplies from minimum supply current. EL5x02 also features an output enable function, which can be used to put the output in to a high-impedance mode. This enables the outputs of multiple amplifiers to be tied together for use in multiplexing applications. Typical applications for these families will include cable driving, filtering, A-to-D and D-to-A buffering, multiplexing and summing within video, communications, and instrumentation designs.