DS3144

Mounting Style : SMD/SMT
Packaging : Tube
Product : Framer
Number of Transceivers : 4
Maximum Operating Temperature : + 70 C
Data Rate : 2.048 Mbps
Package / Case : CSBGA
Supply Current (Max) : 320 mA


Features:

One/Two/Three/Four Independent DS3/E3 Framers on a Single Die
Framing and Formatting to M23 DS3, C-Bit Parity DS3, and G.751 E3
LIU Interface can be Binary (NRZ) or Dual-Rail (POS/NEG)
B3ZS/HDB3 Encoder and Decoder
Generate and Detect DS3/E3 Alarms
Integrated HDLC Controller for Each Channel
Integrated FEAC Controller for Each Channel
Integrated Bit Error-Rate Tester (BERT) for Each Channel
Large Performance-Monitoring Counters
Line, Diagnostic, and Payload Loopbacks
Externally Controlled Transmit Overhead Insertion Port
Support External Timing or Loop-Timing
Framers can be Powered Down When Not Used
8-Bit Processor Port Supports Muxed or Nonmuxed Bus Operation (Intel or Motorola)
3.3V Supply with 5V Tolerant I/O

144-Pin, 13mm x 13mm CSBGA Package

IEEE 1149.1 JTAG Support

Application

SONET/SDH Muxes PDH Muxes Digital Cross-Connect Systems Access Concentrators ATM and Frame Relay EquipmentRouters


Specifications

Voltage Range on Any Input, Bidirectional or Open Drain Output Lead with
Respect to VSS -0.3V to...................................................................... +5.5V
Supply Voltage Range (V_DD) with Respect to V_SS............... -0.3V to +3.63V
Ambient Operating Temperature Range................................. -40 to +85
Junction Operating Temperature Range................................-40 to +125
Storage Temperature Range................................................ -55 to +125
Soldering Temperature Range ............................See IPC/JEDEC J-STD-020A

Description

The DS3141, DS3142, DS3143, and DS3144 (DS314x) devices include all necessary circuitry to frame and format up to four separate DS3 or E3 channels. Each framer in these devices is independently configurable to support M23 DS3, C-Bit Parity DS3, or G.751 E3. The framers interface to a variety of line interface units (LIUs),microprocessor buses, and other system components without glue logic. Each DS3/E3 framer has its own HDLC controller, FEAC controller, and BERT, as well as full support for error detection and generation, performance monitoring, and loopbacks.