Features: Wide input signal amplitude rangefrom 20 mVpp to 660 mVpp differentialData rates up to 15 Megabits/sec 2,7 code On-chip differential gain controlled amplifier, differentiator, comparator gating circuitry, and output pulse generatorInput capacitively coupled directly from the disk head r...
DP8464B: Features: Wide input signal amplitude rangefrom 20 mVpp to 660 mVpp differentialData rates up to 15 Megabits/sec 2,7 code On-chip differential gain controlled amplifier, differentiator, comparator ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The DP8464B Disk Pulse Detector utilizes analog and digital circuitry to detect amplitude peaks of the signal received from the read/write amplifier fitted with the heads of disk drives.
The DP8464B produces a TTL compatible output which, on the positive leading edge, indicates a signal peak. Electrically, these peaks correspond to flux reversals on the magnetic medium. The signal from the read/write amplifier when reading a disk is therefore a series of pulses with alternating polarity.
The Disk Pulse Detector accurately replicates the time position of these peaks. The DP8464B Disk Pulse Detector has three main sections: the Amplifier, the time channel and the gate channel. The Amplifier section consists of a wide bandwidth amplifier, a full wave rectifier and Automatic Gain Control (AGC). The time channel is made from the differentiator and its following bi-directional one shot, while the gate channel is made from the differential comparator with hysteresis, the D flipflop and its following bi-directional one shot.
The Disk Pulse Detector is fabricated using an advanced oxide isolated Schottky process, and has been designed to function with data rates up to 15 Megabits/second. The DP8464B is available in either a 300 mil wide 24-pin dual-inline package or a surface mount 28-pin plastic chip carrier