CS8147

 Two Regulated Outputs
       10V ± 5%; 500 mA
       5V ± 3%; 70 mA
  70µA SLEEP Mode Current
  Inherently Stable Secondary Output (No Output Capacitor Required)
  Fault Protection
      Overvoltage Shutdown
      Reverse Battery
      60V Peak Transient
      -50V Reverse Transient
      Short Circuit
      Thermal Shutdown
  CMOS Compatible Input with Low (IOUT(max)) ENABLE Input Current.

Input Voltage (V_IN) DC .....................................................-18V to 26V
Positive Peak Transient Voltage (46V Load Dump @ V = 14V) ...60V
Negative Peak Transient Voltage .................................................-50V
ESD (Human Body Model) ..............................................................2kV
ENABLE Input......................................................................-0.3 to 10V
Internal Power Dissipation .......................................Internally Limited
Junction Temperature Range........................................-40 to +150
Storage Temperature Range .......................................-65 to +150
Lead Temperature Soldering
    Wave Solder (through hole styles only).....10 sec. max, 260 peak

The CS8147 is a 10V/5V dual output linear regulator. The 10V ±.5% output sources 500mA and the 5V ±3% output sources 70mA. The secondary output is inherently stable and does not require an external capacitor.

The on board ENABLE function controls the regulatorÕs two outputs. When ENABLE is high, the regulator CS8147 is placed in SLEEP mode. Both outputs are disabled and the regulator draws only 70µA of quiescent current.

CS8147 regulator is protected against overvoltage conditions. Both outputs are protected against short circuit and thermal runaway conditions.

The CS8147 is packaged in a 5 lead TO-220 with copper tab. The copper tab can be connected to a heat sink if necessary.