CS8135

 Two Regulated Outputs
       Primary Output 5V ± 5%; 500mA
       Secondary Standby 5V ±5%; 10mA
  Low Dropout Voltage (0.6V at 0.5A)
  ON/OFF Control Option
  Low Quiescent Drain (<3mA)
 RESET Option
  Protection Features Reverse Battery
       60V Load Dump
       -50V Reverse Transient
       Short Circuit
       Thermal Shutdown
       Overvoltage Shutdown

Input Voltage Operating Range................................................-0.5V to 26V
Load Dump ............................................................................................60V
Internal Power Dissipation ...............................................Internally Limited
Junction Temperature Range (T_J)........................................-40 to +150
Storage Temperature Range ..............................................-65 to +150
Lead Temperature Soldering
    Wave Solder (through hole styles only).............10 sec. max, 260peak
Electrostatic Discharge (Human Body Model) ..........................................2kV

The CS8135 is a low dropout, high current, dual 5V linear regulator. The secondary 5V/10mA output is often used for powering systems with standby memory. Quiescent current drain is less than 3mA when supplying 10mA loads from the standby regulator.

In automotive applications, the CS8135 and all regulated circuits are protected from reverse battery installations, as well as two-battery jumps. During line transients, such as a 60V load dump, the 500mA output will automatically shut down the primary output to protect both internal circuits and the load.The standby regulator will continue to power any standby load.

The CS8135 is packaged in a 5 lead TO-220.
NOTE: The CS8135 is compatible with the LM2935.