BTS824R

Crosstalk :
Bandwidth :
On Time (Max) :
Off Time (Max) :
Switch Voltage (Max) :
Operating Supply Voltage :
Number of Switches :
Switch Configuration :
Mounting Style : SMD/SMT
Maximum Operating Temperature : + 150 C
On Resistance (Max) : 0.022 Ohms
Package / Case : PDSO-20-12


Application

• µC compatible high-side power switch with diagnostic feedback for 12V and 24V grounded loads
• All types of resistive, inductive and capacitve loads
• Most suitable for loads with high inrush currents, so as lamps
• Replaces electromechanical relays, fuses and discrete circuits




Pinout

Specifications

Parameter	Symbol	Values	Unit
Supply voltage (overvoltage protection see page 6)	Vbb	43	V
Supply voltage for full short circuit protection Tj,start =-40 ...+150°C	Vbb	36	V
Load current (Short-circuit current, see page 6)	IL	self-limited	A
Load dump protection1) VLoadDump = VA + Vs, VA = 13.5 V RI2) = 2 , td = 400 ms; IN= low or high, each channel loaded with RL = 13.5 ,	VLoaddump3)	60	V
Operating temperature range Storage temperature range	Tj Tstg	-40 ...+150 -55 ...+150	°C
Power dissipation (DC)4) Ta = 25°C: (all channels active) Ta = 85°C:	Ptot	3.6 1.9	W
Maximal switchable inductance, single pulse Vbb =12V, Tj,start =150°C4), see diagrams on page 10 IL = 4.7 A, EAS = 120 mJ, 0 one channel: IL = 9.5 A, EAS = 230 mJ, 0 two parallel channels: IL = 19.0 A, EAS = 450 mJ, 0 four parallel channels:	ZL	7.9 3.7 1.8	mH
Electrostatic discharge capability (ESD) IN: (Human Body Model) ST: out to all other pins shorted: acc. MIL-STD883D, method 3015.7 and ESD assn. std. S5.1-1993 R=1.5k; C=100pF	VESD	1.0 4.0 8.0	kV
Input voltage (DC) see internal circuit diagram page 9 Current through input pin (DC) Pulsed current through input pin5) Current through status pin (DC)	VIN IIN IINp IST	-10 ... +16 ±0.3 ±5.0 ±5.0	V mA

Description

The BTS824R features are as follows:

• N channel vertical power MOSFET with charge pump, ground referenced CMOS compatible input and diagnostic feedback, monolithically integrated in Smart SIPMOS^® technology.
• Providing embedded protective functions

The BTS824R is a N channel vertical power MOSFET with charge pump, ground referenced CMOS compatible input and diagnostic feedback, monolithically integrated in Smart SIPMOS technology.It is designed for (1)C compatible high-side power switch with diagnostic feedback for 12V and 24V grounded loads; (2)all types of resistive, inductive and capacitve loads; (3)most suitable for loads with high inrush currents, so as lamps; (4)replaces electromechanical relays, fuses and discrete circuits.

Features of the BTS824R are:(1)short circuit protection ; (2)overload protection; (3)current limitation; (4)thermal shutdown; (5)overvoltage protection (including load dump) with external resistor; (6)reverse battery protection with external resistor; (7)loss of ground and loss of vbb protection; (8)electrostatic discharge protection (ESD).Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office.

The absolute maximum ratings of the BTS824R can be summarized as:(1)supply voltage:43V;(2)storage temperature range:-55 to 150;(3)operating temperature range:-40 to 150;(4)power dissipation:3.6W;(6)supply voltage for full short circuit protection:36V.Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body,or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide (see address list).

At present there is not too much information about BTS824R .If you are willing to find more about BTS824R, please pay attention to our web! We will promptly update the relevant information.

Parameters:

Technical/Catalog Information	BTS824R
Vendor	Infineon Technologies
Category	Integrated Circuits (ICs)
Package / Case	DSO-20
Mounting Type	Surface Mount
Type	High Side
Voltage - Supply	5.5 V ~ 40 V
On-State Resistance	70 mOhm
Current - Output / Channel	4.7A
Current - Peak Output	15A
Packaging	Tape & Reel (TR)
Input Type	Non-Inverting
Number of Outputs	4
Operating Temperature	-40°C ~ 150°C
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	BTS824R BTS824R