AQZ262

Product Type : PCB Mount
Contact Form : 1 Form A (SPST-NO)
Output Device : MOSFET
Mounting Style : Through Hole
Load Voltage Rating : 60 V
Load Current Rating : 10 A
Control Voltage Range : 1.5 V to 5 V
Package / Case : SIL-4


Features:

1. High capacity type power photoMOS relay. Can switch a wide range of currents and voltages. Can control various types of loads, from very small loads to a maximum 6A AC/DC current for sequencers, motors, and lamps.
2. Low ON resistance and high sensitivity. Low ON resistance of less than 50 mW on a par with mechanical relays (AQZ262). High sensitivity LED operate current of 3 mA (at 25°C 77°F ).
3. AC/DC dual use Bi-directional control is possible. There is no need to differentiate depending on the load as was necessary with the conventional SSR.
4. 4-pin SIL type.4-pin SIL type of (L) 43.0 mm× (W) 9.0mm× (H) 32.0 mm (L) 1.693 inch× (W).354 inch× (H) 1.260inch.

5. Low-level off state leakage current In contrast to the SSR with an off state leakage current of several milliamps, the PhotoMOS relay features a very small off state leakage current of only 10mA even at the rated load voltage.
6. Controls low-level analog signals The triac, photocoupler, or SSR cannot be used to control signals of less than several hundred mV. The high capacity type power PhotoMOS relay feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion.                                                                                                          

Application

• Mercury relay replacement
• Railroad, traffic signals
• Compact motors, lamps, heaters
• OA equipment
• Measurement instruments


Specifications

Item			Symbol	AQZ262	AQZ264	Remarks
Input	LED forward current		IF	50 mA
	LED reverse voltage		VR	5V
	Peak forward current		IFP	1 A		f = 100 Hz, Duty factor = 0.1%
	Power dissipation		PIN	75 mA
Output	Load voltage(peak AC)		VL	60V	400V
	Continuous load current(peak AC)		IL	6.0 A	1.0A
	Peak load current		Ipeak	10.0 A	3.0A	100 ms (1 shot), VL= DC
	Power dissipation		Pout	3.0W
Total power dissipation			PT	3.0W
I/O isolation voltage			VISO	1500V AC
Temperature limits		Operating	TOPR	40°C to +85°C 40°F to +185°F		Non-condensing at low temperatures
		Storage	TSTG	40°C to +100°C 40°F to +212°F

Parameters:

Technical/Catalog Information	AQZ262
Vendor	Panasonic Electric Works
Category	Relays
Mounting Type	Through Hole
Termination Style	PC Pin
Package / Case	4-SIP
Circuit	SPST-NO (1 Form A)
Load Current	6A
Voltage - Input	1.25VDC
Voltage - Load	0 ~ 60 V
Output Type	AC, DC
On-State Resistance	50 mOhm
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	AQZ262 AQZ262 255 2699 ND 2552699ND 255-2699