AME8510

The AME8510/8520/8530 family allows the user to cus-tomize the CPU monitoring function without any external components.  The user has a large choice of reset volt-age thresholds and  output driver configurations, all of which are preset at  the factory.  Each wafer is trimmed to the customer's specifications.These circuits will ignore fast negative going transientson VDD.  The state of the reset output is guaranteed to be correct down to 1V.After VDD crosses above a factory preset threshold,the AME8510/8520/8530 assert a reset signal.  After a predetermined time (the "reset" interval) the reset is deasserted. If VDD ever drops below the threshold voltage a reset is asserted immediately.  In addition to a supply monitoring function the AME8510/8520 also monitor tran-sitions at the watch dog (WDI) input.  If a logic transition does not occur at the WDI pin within a certain time inter-val (the "watchdog" interval) then a reset is asserted.  The reset deasserts after the reset interval, as explained ear-lier.The AME8510/8530 can both assert a reset manually by pulling the MRB input to ground.Space saving SOT-25 packages and micropower qui-escent current make this family a natural for portable battery powered equipment.