IC SUPERVISOR MPU 2.63V WD 8SOIC
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Series: | - | Manufacturer: | Analog Devices Inc |
Type: | Simple Reset/Power-On Reset | Number of Voltages Monitored: | 1 |
Output: | Push-Pull, Totem Pole | Package / Case : | BGA-52 |
Reset: | Active High | Reset Timeout: | 160 ms Minimum |
Voltage - Threshold: | 2.63V | Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | Surface Mount | Package / Case: | 8-SOIC (0.154", 3.90mm Width) |
Supplier Device Package: | 8-SO |
The ADM706P/R/S/T and the ADM708R/S/T microprocessor supervisory circuits are suitable for monitoring either 3 V or 3.3 V power supplies.
The ADM706P/R/S/T and the ADM708R/S/T provide the following functions: 1. Power-supply monitoring circuitry which generates a Reset output during power-up, power-down and brownout condi- tions. The reset output remains operational with VCC as lowas 1 V. 2. Independent watchdog monitoring circuitry which is acti- vated if the watchdog input has not been toggled within 1.6 seconds. 3. A 1.25 V threshold detector for power fail warning, low bat-tery detection, or to monitor an additional power supply. 4. An active low debounced manual reset input (MR).
The ADM706P/R/S/T and the ADM708R/S/T are identical except for the reset threshold monitor levels which are 2.63 V, 2.93 V, and 3.08 V respectively. The ADM706P is identical to the ADM706R in that the reset threshold is 2.63 V. It differs only in that it has an active high reset output.
The ADM706P/R/S/T and the ADM708R/S/T provide the same functionality as the ADM706R/S/T and only differ in that: 1. A watchdog timer function is not available. 2. An active high reset output (RESET) in addition to the active low (RESET ) output is available. All parts are available in 8-lead DIP and narrow SOIC packages.
Technical/Catalog Information | ADM706PAR |
Vendor | Analog Devices Inc |
Category | Integrated Circuits (ICs) |
Output | Push-Pull, Totem Pole |
Reset | Active High |
Package / Case | 8-SOIC (3.9mm Width) |
Packaging | Tube |
Number of Voltages Monitored | 1 |
Reset Timeout | 160 ms Minimum |
Type | Watchdog Circuit |
Voltage - Threshold | 2.63V |
Operating Temperature | -40°C ~ 85°C |
Drawing Number | * |
RoHS Status | RoHS Non-Compliant |
Other Names | ADM706PAR ADM706PAR |