ADF4360-8BCPZ

Series: -
PLL: Yes
Number of Circuits: 1
Differential - Input:Output: No/No
Divider/Multiplier: Yes/No
Mounting Type: Surface Mount
Output: Clock
Voltage - Supply: 3 V ~ 3.6 V
Operating Temperature: -40°C ~ 85°C
Ratio - Input:Output: 1:2
Frequency - Max: 400MHz
Packaging: TrayAlternate Packaging
Manufacturer: Analog Devices Inc
Type: Fanout Distribution, Integer N Synthesizer (RF)
Input: CMOS, TTL
Package / Case: 24-VFQFN Exposed Pad, CSP
Supplier Device Package: 24-LFCSP-VQ (4x4)


Description

The ADF4360-8BCPZ is one member of the ADF4360-8 series.The ADF4360-8 is an integrated integer-N synthesizer and voltage-controlled oscillator (VCO). The ADF4360-8BCPZ center frequency is set by external inductors. This allows a frequency range of between 65 MHz to 400 MHz.Control of all the on-chip registers is through a simple 3-wire interface. ADF4360-8BCPZ operates with a power supply ranging from 3.0 V to 3.6 V and can be powered down when not in use.

Features of the ADF4360-8BCPZ are:(1)output frequency range: 65 MHz to 400 MHz; (2)3.0 V to 3.6 V power supply; (3)1.8 V logic compatibility; (4)integer-N synthesizer; (5)programmable output power level; (6)3-wire serial interface; (7)digital lock detect; (8)hardware and software power-down mode.

The absolute maximum ratings of the ADF4360-8BCPZ can be summarized as:(1)AVDD to GND:0.3V to +3.9 V;(2)storage temperature range:-65 to +150;(3)operating temperature range:-40 to 85;(4)AVDD to DVdd:-0.3V to +0.3V;(5)maximum junction temperature:150.Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.During initial power-up, a write to the control latch powers up the part, and the bias currents of the VCO begin to settle. If these currents have not settled to within 10% of their steady-state value, and if the N counter latch is then programmed, the VCO may not oscillate at the desired frequency, which does not allow the band select logic to choose the correct frequency band, and the ADF4360-8 may not achieve lock. If the recom-mended interval is inserted, and the N counter latch is pro-grammed, the band select logic can choose the correct fre-quency band, and the part locks to the correct frequency.

Parameters:

Technical/Catalog Information	ADF4360-8BCPZ
Vendor	Analog Devices Inc
Category	Integrated Circuits (ICs)
Type	Integer-N Synthesizer/VCO
Voltage - Supply	3 V ~ 3.6 V
Number of Outputs	2
Input	CMOS
Output	-
Frequency-Max	400MHz
Package / Case	24-LFCSP
Packaging	Tray
Operating Temperature	-40°C ~ 85°C
Drawing Number	*
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	ADF4360 8BCPZ ADF43608BCPZ