IC OPAMP VF R-R DUAL LN LP 8MSOP
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Series: | FastFET™ | Manufacturer: | Analog Devices Inc | ||
Amplifier Type: | Voltage Feedback | Type: | - | ||
Number of Circuits: | 2 | Max Output Power x Channels @ Load: | - | ||
Output Type: | Rail-to-Rail | Slew Rate: | 180 V/µs | ||
Voltage - Supply: | - | Features: | - | ||
Gain Bandwidth Product: | - | Package / Case : | SOP-8 | ||
-3db Bandwidth: | 145MHz | Current - Input Bias: | 3pA | ||
Voltage - Input Offset: | 400µV | Current - Supply: | 6.6mA | ||
Current - Output / Channel: | 30mA | Voltage - Supply, Single/Dual (±): | 5 V ~ 24 V, ±2.5 V ~ 12 V | ||
Operating Temperature: | -40°C ~ 85°C | Mounting Type: | Surface Mount | ||
Package / Case: | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Supplier Device Package: | 8-MSOP |
The AD8066ARM belongs to the AD8066 series. It is a kind of fast FET voltage feedback amplifier. It is available in MSOP-8 small package. Besides,it can be used in accosions such as instrumentation,photodiode preamps,filters,A/D drivers,level shifting and buffering.
There are some features of AD8066ARM as follows. (1) high performance and high speed; (2) wide supply voltage range: 5 V to 24 V; (3) single-supply and rail-to-rail output; (4) high common-mode rejection ratio; (5) excellent distortion specifications; (6) no phase reversal; (7) low noise and low cost; (8) 1 pA input bias current.
What comes next is about its electrical characters of AD8066ARM. (1): supply voltage is 26.4 V; (2): common-mode input voltage is from VEE-0.5 V to VCC+0.5 V; (3): differential input voltage is 1.8 V; (4): storage temperature is from 65 to 125 ; (5): operating temperature is from -40 to 85 ; (6): lead temperature range (soldering,10 sec) is 300 ; (7): power dissipation is 1.5 W. Then is some elecrtical specifications when TA is 25 . (1): the typical input offset voltage is 0.4 mV and the maximum is 1.5 mV when VCM is 0 V; (2): the typical input offset voltage drift is 1 V/ and the maximum is 17 V/; (3): the typical output voltage swing is the typical quiescent current per amplifier is 6.4 mA and the maximum is 7.2 mA; (4): the power supply rejection ratio is -100 dB and the minimum is -85 dB.
Technical/Catalog Information | AD8066ARM |
Vendor | Analog Devices Inc |
Category | Integrated Circuits (ICs) |
Packaging | Tube |
Amplifier Type | Voltage Feedback |
Number of Circuits | 2 - Dual |
Package / Case | 8-MSOP, Micro8?, 8-uMAX, 8-uSOP, |
Slew Rate | 180 V/s |
Gain Bandwidth Product | - |
Current - Supply | 6.6mA |
Current - Output / Channel | 30mA |
Voltage - Supply, Single/Dual (±) | 5 V ~ 24 V, ±2.5 V ~ 12 V |
Output Type | Rail-to-Rail |
-3db Bandwidth | 145MHz |
Current - Input Bias | 3pA |
Operating Temperature | -40°C ~ 85°C |
Voltage - Input Offset | 400V |
Drawing Number | * |
RoHS Status | RoHS Non-Compliant |
Other Names | AD8066ARM AD8066ARM |