74LVT534D

Output Type :
Low Level Output Current :
Number of Circuits : 1
Supply Voltage - Max : 3.6 V
Mounting Style : SMD/SMT
Input Type : Single-Ended
Maximum Operating Temperature : + 85 C
Packaging : Tube
Package / Case : SOT-163
High Level Output Current : - 32 mA
Logic Type : D-Type Edge Triggered Flip-Flop
Polarity : Inverting
Logic Family : LVT
Propagation Delay Time : 3.5 ns at 3.3 V


Description

The 74LVT534D belongs to LVT534 family which is a high-performance BiCMOS product designed for VCC operation at 3.3V. This device is an 8-bit, edge triggered register coupled to eight 3-State output buffers. The two sections of the device are controlled independently by the clock (CP) and Output Enable (OE) control gates. The state of each D input (one set-up time before the Low-to-High clock transition) is transferred to the corresponding flip-flop's Q output. The 3-State output buffers are designed to drive heavily loaded 3-State buses, MOS memories, or MOS microprocessors. The active-Low Output Enable (OE) controls all eight 3-State buffers independent of the clock operation. When OE is Low, the stored data appears at the outputs. When OE is High, the outputs are in the High-impedance "off" state, which means they will neither drive nor load the bus.

The features of 74LVT534D can be summarized as (1)3-state outputs for bus interfacing; (2)common output enable; (3)TTL input and output switching levels; (4)input and output interface capability to systems at 5V supply; (5)bus-hold data inputs eliminate the need for external pull-up resistors to hold unused inputs; (6)live insertion/extraction permitted; (7)no bus current loading when output is tied to 5V bus; (8)power-up 3-state; (9)power-up reset; (10)latch-up protection exceeds 500mA per JEDEC Std 17; (11)ESD protection exceeds 2000V per MIL STD 883 Method 3015 and 200V per machine model.

The absolute maximum ratings of 74LVT534D are (1)VCC DC supply voltage: -0.5 to +4.6 V; (2)IIK DC input diode current (VI < 0): -50 mA; (3)VI DC input voltage3: -0.5 to +7.0 V; (4)IOK DC output diode current(VO < 0): -50 mA; (5)VOUT DC output voltage3(output in off or high state): -0.5 to +7.0V; (6)IOUT DC output current(output in low state/output in high state): 128/-64mA; (7)Tstg storage temperature range: -65 to 150 °C.(1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C. 3. The input and output negative voltage ratings of the 74LVT534D may be exceeded if the input and output clamp current ratings are observed.).