Features: • 5-volt tolerant inputs/outputs, for interfacing with 5-volt logic• Supply voltage range of 2.7V to 3.6V• Complies with JEDEC standard no. 8-1A• CMOS low power consumption• Direct interface with TTL levels• High impedance when VCC = 0V• Bushold ...
74LVCH245A: Features: • 5-volt tolerant inputs/outputs, for interfacing with 5-volt logic• Supply voltage range of 2.7V to 3.6V• Complies with JEDEC standard no. 8-1A• CMOS low power con...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
SYMBOL | PARAMETER | CONDITIONS | RATING | UNIT |
VCC | DC supply voltage | 0.5 to +6.5 | V | |
IIK | DC input diode current | VI<0 | 50 | mA |
VI | DC input voltage | Note 2 | 0.5 to +6.5 | V |
IOK | DC output diode current | VO >VCC or VO < 0 | ±50 | mA |
VO | DC output voltage; output HIGH or LOW state | Note 2 | 0.5 to VCC +0.5 | V |
DC output voltage; output 3-State | Note 2 | 0.5 to 6.5 | ||
IO | DC output source or sink current | VO = 0 to VCC | ±50 | mA |
IGND, ICC | DC VCC or GND current | ±100 | mA | |
Tstg | Storage temperature range | 65 to +150 | ||
PTOT | Power dissipation per package plastic mini-pack (SO) plastic shrink mini-pack (SSOP and TSSOP) |
above +70 derate linearly with 8 mW/K above +60 derate linearly with 5.5 mW/K |
500 500 |
mW |
The 74LVC245A/74LVCH245A is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families.
Inputs can be driven from either 3.3V or 5V devices. In 3-State operation, outputs can handle 5V. These features allow the use of these devices as translators in a mixed 3.3V/5V environment.
The 74LVC245A/74LVCH245A is an octal transceiver featuring non-inverting 3-State bus compatible outputs in both send and receive directions. The '245' features an output enable (OE) input for easy cascading and a send/receive (DIR) input for direction control. OE controls the outputs so that the buses are effectively isolated.
The '245' is functionally identical to the '640', but the '640' has true (non-inverting) outputs.