Features: • Wide supply voltage range of 1.2 to 3.6 V• In accordance with JEDEC standard no. 8-1A• Inputs accept voltages up to 5.5 V• CMOS lower power consumption• Direct interface with TTL levels• Demultiplexing capability• Two independent 2-to-4 decoder...
74LVC139: Features: • Wide supply voltage range of 1.2 to 3.6 V• In accordance with JEDEC standard no. 8-1A• Inputs accept voltages up to 5.5 V• CMOS lower power consumption• Dir...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
SYMBOL | PARAMETER | CONDITIONS | RATING | UNIT |
VCC | DC supply voltage | 0.5 to +6.5 | V | |
IIK | DC input diode current | VI< 0 | 50 | mA |
VI | DC input voltage | Note 2 | 0.5 to +5.5 | V |
IOK | DC output diode current | VO>VCC or VO< 0 | ±50 | mA |
VO | DC output voltage | Note 2 | 0.5 to VCC +0.5 | V |
IO | DC output source or sink current | VO = 0 to VCC | ±50 | mA |
IGND,ICC | DC VCC or GND current | ±100 | mA | |
Tstg | Storage temperature range | 60 to +150 | °C | |
PTOT | Power dissipation per package plastic mini-pack (SO) plastic shrink mini-pack (SSOP and TSSOP) |
above +70°C derate linearly with 8 mW/K above +60°C derate linearly with 5.5 mW/K |
500 500 |
mW |
NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
The 74LVC139 is a low-voltage, low-power, high-performance Si-gate CMOS device, superior to most advanced CMOS
compatible TTL families.
The 74LVC139 is a dual 2-to-4 line decoder/demultiplexer. This device has two independent decoders, each accepting two binary weighted inputs (nA0 and nA1) and providing four mutually exclusive active LOW outputs (nY0 to nY3).Each decoder has an active LOW input (nE).
When nE is HIGH, every output is forced HIGH. The enable can be used as the data input for a 1-to-4 demultiplexer application.