Multiplexer Switch ICs TRIPLE 2-CHANNEL MUX/DMUX
74LV4053N: Multiplexer Switch ICs TRIPLE 2-CHANNEL MUX/DMUX
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Number of Channels : | 3 Channel | On Resistance (Max) : | 180 Ohms | ||
Propagation Delay Time : | 25 ns, 9 ns, 6 ns, 5 ns, 4 ns, 3 ns | On Time (Max) : | 125 ns | ||
Off Time (Max) : | 95 ns | Supply Voltage - Max : | 6 V | ||
Supply Voltage - Min : | 1 V | Maximum Power Dissipation : | 750 mW | ||
Maximum Operating Temperature : | + 125 C | Minimum Operating Temperature : | - 40 C | ||
Package / Case : | PDIP-16 | Packaging : | Tube |
The 74LV4053N belongs to 74LV4053 family and it is a triple 2-channel analog multiplexer/demultiplexer with a common enable input (E) which is a low-voltage CMOS device and is pin and function compatible with the 74HC/HCT4053. Each multiplexer/demultiplexer has two independent inputs/outputs (nY0 to nY1), a common input/output (nZ) and three digital select inputs (S1 to S3). With E LOW, one of the two switches is selected (low impedance ON-state) by S1 to S3 With E HIGH, all switches are in the high impedance OFF-states, independent of S1 and S3. VCC and GND are the supply voltage pins for the digital control inputs (S1, to S3, and E). The VCC to GND ranges are 1.0 to 6.0 V. The analog inputs/outputs (nY0, to nY1, and nZ) can swing between VCC as a positive limit and VEE as a negative limit. VCC - VEE may not exceed 6.0 V. For operation as a digital multiplexer/demultiplexer, VEE is connected to GND (typically ground).
The features of 74LV4053N can be summarized as (1)optimized for low voltage applications: 1.0 to 6.0 V; (2)accepts TTL input levels between VCC = 2.7 V and VCC = 3.6 V; (3)low typ "ON" resistance: 100 at Vcc ± VEE = 4.5 V, 150 at Vcc ± VEE = 3.0 V, 240 at Vcc ± VEE = 2.0 V; (4)logic level translation: to enable 3V logic to communicate with ±3 V analog signals; (5)typical abreak before makeo built in; (6)output capability: non-standard; (7)ICC category: MSI.
The absolute maximum ratings of 74LV4053N are (1)VCC DC supply voltage: -0.5 to +7.0 V; (2)±IIK DC input diode current(VI <-0.5 or VI > VCC + 0.5V): 20mA; (3)±ISK DC output switch current(VO < -0.5 or VO > VCC + 0.5V): 20mA; (4)±IS DC switch current (-0.5V < VS < VCC + 0.5V): 25mA; (5)±IGND, ±ICC DC VCC or GND current for types with bus driver outputs: 50mA; (6)Tstg storage temperature range: -65 to +150 °C; (7)power dissipation per package for temperature range: -40 to +125°C-plastic DIL(above +70°C derate linearly with 12mW/K)/-plastic mini-pack (SO)(above +70°C derate linearly with 8 mW/K)/-plastic shrink mini-pack (SSOP and TSSOP)(above +60°C derate linearly with 5.5 mW/K): 750/500/400mW.(1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the 74LV4053N at these or any other conditions beyond those indicated under arecommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.)