74LV365N

Number of Input Lines : 6
Number of Output Lines : 6
Polarity : Non-Inverting
Maximum Operating Temperature : + 125 C
Supply Voltage - Max : 3.6 V
Packaging : Tube
Supply Voltage - Min : 1 V
Mounting Style : Through Hole
Package / Case : SOT-38-16


Description

The 74LV365N belongs to 74LV365 family which is a low-voltage CMOS device and is pin and function compatible 74HC/HCT365. The 74LV365 is a hex non-inverting buffer/line driver with 3-State outputs. The 3-State outputs (nY) are controlled by the output enable inputs (OE1, OE2). A HIGH on OEn, causes the outputs to assume a high impedance OFF-state.

The features of 74LV365N can be summarized as (1)optimized for Low Voltage applications: 1.0 to 3.6V; (2)accepts TTL input levels between VCC = 2.7V and VCC = 3.6V; (3)typical VOLP (output ground bounce) <0.8V @ VCC = 3.3V, Tamb = 25°C; (4)typical VOHV (output VOH undershoot) > 2V @ VCC = 3.3V, Tamb = 25°C; (5)non-inverting outputs; (6)output capability: bus driver; (7)ICC category: MSI.

The absolute maximum ratings of 74LV365N are (1)VCC DC supply voltage: -0.5 to +4.6 V; (2)±IIK DC input diode current(VI < 0.5 or VI > VCC + 0.5V): 20 mA; (3)±IOK DC output diode current(VO < 0.5 or VO > VCC + 0.5V): 50 mA; (4)±IO DC output source or sink current- bus driver outputs(-0.5V < VO < VCC + 0.5V): 35 mA; (5)±IGND, ±ICC DC VCC or GND current for types with-bus driver outputs: 70 mA; (6)Tstg storage temperature range: -65 to +150 °C; (7)Ptot power dissipation per package for temperature range of the 74LV365N: 40 to +125°C,plastic DIL above +70°C derate linearly with 12mW/K/plastic mini-pack (SO) above +70°C derate linearly with 8 mW/K/plastic shrink mini-pack (SSOP and TSSOP)above +60°C derate linearly with 5.5 mW/K: 750/500/400mW.(1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the 74LV365N at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute maximum rated conditions for extended periods may affect device reliability. 2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.).