74LV365

Features:

• Optimized for Low Voltage applications: 1.0 to 3.6V
• Accepts TTL input levels between V_CC = 2.7V and V_CC = 3.6V
• Typical V_OLP (output ground bounce)  0.8V @ V_CC = 3.3V, T_amb = 25°C
• Typical V_OHV (output VOH undershoot)  2V @ V_CC = 3.3V, T_amb = 25°C
• Non-inverting outputs
• Output capability: bus driver
• I_CC category: MSI


Pinout




Specifications

In accordance with the Absolute Maximum Rating System (IEC 134).
Voltages are referenced to GND (ground = 0V).

SYMBOL	PARAMETER	CONDITIONS	RATING	UNIT
VCC	DC supply voltage		0.5 to +4.6	V
±IIK	DC input diode current	VI < 0.5 or VI > VCC + 0.5V	20	mA
±IOK	DC output diode current	VO < 0.5 or VO > VCC + 0.5V	50	mA
±IO	DC output source or sink current standard outputs	0.5V < VO < VCC + 0.5V	35	mA
±IGND, ±ICC	DC VCC or GND current for types with standard outputs		50	mA
Tstg	Storage temperature range		65 to +150	°C
PTOT	Power dissipation per package plastic DIL plastic mini-pack (SO) plastic shrink mini-pack (SSOP and TSSOP)	for temperature range: 40 to +125°C above +70°C derate linearly with 12 mW/K above +70°C derate linearly with 8 mW/K above +60°C derate linearly with 5.5 mW/K	750 500 400	mW

NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.

Description

The 74LV365 is a low-voltage CMOS device and is pin and function compatible 74HC/HCT365.

The 74LV365 is a hex non-inverting buffer/line driver with 3-State outputs. The 3-State outputs (nY) are controlled by the output enable inputs (OE1, OE2).

A HIGH on OEn, causes the outputs to assume a high impedance OFF-state.