Features: • Optimized for low voltage applications: 1.0 to 3.6 V• Accepts TTL input levels between VCC = 2.7 V and VCC = 3.6 V• Typical VOLP (output ground bounce) < 0.8 V at VCC = 3.3 V,Tamb = 25°C• Typical VOHV (output VOH undershoot) > 2 V at VCC = 3.3 V,Tamb = 25°...
74LV154: Features: • Optimized for low voltage applications: 1.0 to 3.6 V• Accepts TTL input levels between VCC = 2.7 V and VCC = 3.6 V• Typical VOLP (output ground bounce) < 0.8 V at VC...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
SYMBOL | PARAMETER |
CONDITIONS |
RATING |
Unit |
VCC | DC supply voltage |
0.5 to +4.6 |
V | |
±IIK | DC input diode current |
VI < 0.5 or VI > VCC + 0.5V |
20 |
mA |
±IOK | DC output diode current |
VO < 0.5 or VO > VCC + 0.5V |
50 |
mA |
±IO | DC output source or sink current standard outputs |
0.5V < VO < VCC + 0.5V |
25 |
mA |
±IGND, ±ICC |
DC VCC or GND current for types with standard outputs |
50 |
mA | |
Tstg | storage temperature range |
65 to +150 |
||
PTOT | Power dissipation per package plastic DIL plastic mini-pack (SO) plastic shrink mini-pack (SSOP and TSSOP) |
for temperature range: 40 to +125°C above +70°C derate linearly with 12 mW/K above +70°C derate linearly with 8 mW/K above +60°C derate linearly with 5.5 mW/K |
750 500 400 |
mW |
The 74LV154 is a low-voltage CMOS device and is pin and function compatible with 74HC/HCT154.
The 74LV154 decoders accept four active HIGH binary address inputs (A0 to A3) and provide 16 mutually exclusive active LOW outputs(Y0 to Y15).
The 2-input enable inputs (E0, E1) can be used to strobe the decoder to eliminate the normal decoding "glitches" on the outputs, or it can be used for expansion of the decoder.
The enable input has two AND'ed inputs which must be LOW to enable the outputs.
The 74LV154 can be used as a 1-to-16 demultiplexer by using one of the enable inputs as the multiplexed data input.
When the other enable is LOW, the addressed output will follow the state of the applied data.