74HCT4316

Note to ratings
To avoid drawing V_CC current out of terminal Z, when switch current flows in terminals Y_n, the voltage drop across the bidirectional switch must not exceed 0.4 V. If the switch current flows into terminals Z, no V_CC current will flow out of terminal Y_n. In this case there is no limit for the voltage drop across the switch, but the voltages at Y_n and Z may not exceed V_CC or V_EE.

The 74HCT4316 is high-speed Si-gate CMOS devices. They are specified in compliance with JEDEC standard no. 7A.

The 74HCT4316 has four independent analog switches. Each switch has two input/output terminals (nY, nZ) and an active HIGH select input (nS). When the enable input (E) is HIGH, all four analog switches are turned off.

Current through a switch of the 74HCT4316 will not cause additional V_CC current provided the voltage at the terminals of the switch is maintained within the supply voltage range; V_CC >> (V_Y, V_Z) >> V_EE. Inputs nY and nZ are electrically equivalent terminals.

V_CC and GND of the 74HCT4316 are the supply voltage pins for the digitalcontrol inputs (E and nS). The V_CC to GND ranges are 2.0 to 10.0 V for HC and 4.5 to 5.5 V for HCT. The analog inputs/outputs (nY and nZ) can swing between V_CC as a positive limit and V_EE as a negative limit. V_CC - V_EE may not exceed 10.0 V.

See the "4016" for the version without logic level translation.