Features: · Wide operating voltage from 2.0 to 6.0 V· Symmetrical output impedance· High noise immunity· Low power dissipation· Balanced propagation delays· Very small 5 pins package· Output capability: bus driver.PinoutSpecifications SYMBOL PARAMETER CONDITIONS MIN. MAX. UNI...
74HCT1G126: Features: · Wide operating voltage from 2.0 to 6.0 V· Symmetrical output impedance· High noise immunity· Low power dissipation· Balanced propagation delays· Very small 5 pins package· Output capabil...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: · Output capability: standard· ICC category: SSIPinoutDescription The 74HC/HCT02 are hig...
Features: · Level shift capability· Output capability: standard (open drain)· ICC category: SSIPin...
SYMBOL |
PARAMETER |
CONDITIONS |
MIN. |
MAX. |
UNIT |
VCC | supply voltage |
-0.5 |
+7.0 |
V | |
IIK | input diode current | VI < -0.5 V or VI > VCC + 0.5 V; |
- |
±20 |
mA |
IOK | output diode current | VO < -0.5 V or VO > VCC + 0.5 V; |
- |
±20 |
mA |
IO | output source or sink current | -0.5 V < VO < VCC + 0.5 V; |
- |
±35.0 |
mA |
ICC | VCC or GND current | note 1 |
- |
±70 |
mA |
Tstg | storage temperature |
-65 |
+150 |
°C | |
PD | power dissipation per package | for temperature range from -40 to +125 °C; note 3 |
- |
200 |
mW |
Notes
1. Stresses beyond those listed may cause permanent damage to the device. These are stress rating only and functional operation of the device at these or any other conditions beyond those under 'recommended operating conditions' is not implied. Exposure to absolute maximum rated conditions for extended periods may affect device reliability.
2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
3. Above 55 °C the value of PD derates linearly with 2.5 mW/K.
The 74HCT1G126 is a highspeed Si-gate CMOS device.
The 74HCT1G126 provides one non-inverting buffer/line driver with 3-state output. The 3-state output is controlled by the output enable input pin (OE). A LOW at pin OE causes the output as assume a high-impedance OFF-state.
The bus driver output currents of the 74HCT1G126 are equal compared to the 74HC/HCT126.