DescriptionThe 74HC4051PW is one member of the 74HC4051 series.The 74HC4051 is 8-channel analog multiplexers/demultiplexers with three digital select inpu(S0 to S2), an active LOW enable input (E), eight independent inputs/outputs (Y0 to Y7) and a common input/output (Z).With E LOW, one of the eig...
74HC4051PW: DescriptionThe 74HC4051PW is one member of the 74HC4051 series.The 74HC4051 is 8-channel analog multiplexers/demultiplexers with three digital select inpu(S0 to S2), an active LOW enable input (E), ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: · Output capability: standard· ICC category: SSIPinoutDescription The 74HC/HCT02 are hig...
Features: · Level shift capability· Output capability: standard (open drain)· ICC category: SSIPin...
The 74HC4051PW is one member of the 74HC4051 series.The 74HC4051 is 8-channel analog multiplexers/demultiplexers with three digital select inpu(S0 to S2), an active LOW enable input (E), eight independent inputs/outputs (Y0 to Y7) and a common input/output (Z).With E LOW, one of the eight switches is selected (low impedance ON-state) by S0 to S2. With E HIGH, all switches are in the high impedance OFF-state,independent of S0 to S2.
Features of the 74HC4051PW are:(1)wide analog input voltage range: ± 5V.; (2)low "ON" resistance:80 (typ.) at VCC - VEE = 4.5 V,70 (typ.) at VCC - VEE = 6.0 V,60 (typ.) at VCC - VEE = 9.0 V; (3)logic level translation:to enable 5 V logic to communicate with ± 5 V analog signals; (4)typical "break before make" built in; (5)output capability: non-standard; (6)ICC category: MSI.
The absolute maximum ratings of the 74HC4051PW can be summarized as:(1)DC supply voltage:-0.5 to 11.0V;(2)storage temperature range:-65 to 150;(3)power dissipation per package plastic DIL:750mW;(4)DC VEE current:20 mA;(5)DC VCC or GND current:50 mA;(6)plastic minipack (SO):500 mW.To avoid drawing VCC current out of terminal Z, when switch current flows in terminals Yn, the voltage drop across the bidirectional switch must not exceed 0.4 V. If the switch current flows into terminal Z, no VCC current will flow out of terminals Yn. In this case there is no limit for the voltage drop across the switch, but the voltages at Yn and Z may not exceed VCC or VEE.The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products of the 74HC4051PW are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk.