74HC367DR

The 74HC367DR belongs to the 74HC367 series. It is a device which has HEX buffers amd line drivers with 3-state outputs. It is available in the SOIC-D package. It can be used in 3-state memory address drivers,clock drivers,bus-oriented receivers and transmitters.

There are some features of the 74HC367DR as follows. (1) wide operating voltage range of 2 V to 6 V; (2) high-current 3-State outputs drive bus lines, buffer memory address registers,or drive up To 15 LSTTL loads; (3) true outputs; (4) low power consumption; (5) typical tpd which is 10 ns; (6) ±6 mA output drive at 5 V; (7) low input current of 1 A max.

The following is some information about the absolute maximum ratings of the 74HC367DR over operating free-air temperature range. (1): supply voltage (VCC) is from -0.5 V to 7 V; (2): input clamp current (IIK) is ±20 mA; (3): output clamp current (IOK) is ±20 mA; (4): continuous output current (IO) is ±35 mA; (5): continuous current through VCC or GND is ±70 mA; (6): thermal impedance for D package is 73 /W; (7): storage temperature range (Tstg) is from -65 to 150 . Then is the electrical characteristics over recommended operating free-air temperature range. (1): the minimum VOH is 1.9 V when VCC is 2 V and IOH is -20 A,and is 4.4 V at VCC is 4.5 V,and is 5.9 V at VCC is 6 V; (2): the maximum VOL is 0.1 for VCC is 2 V,4.5 V and 6 V,IOL is 20 A; (3): the maximum ICC is 80 A at the condition of VCC is 6 V and IO is 0.