Features: • Consists of five 2-to-1 Multiplexers• High impedance PNP base inputs for reduced loading (20mA in High and Low states)• Designed for address multiplexing of dynamic RAM and other applications• Output inverting/non-inverting option• 30 termination impedanc...
74F711A: Features: • Consists of five 2-to-1 Multiplexers• High impedance PNP base inputs for reduced loading (20mA in High and Low states)• Designed for address multiplexing of dynamic RAM...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
SYMBOL | PARAMETER | RATING | UNIT | |
VCC | Supply voltage | 0.5 to +7.0 | V | |
VIN | Input voltage | 0.5 to +7.0 | V | |
IIN | Input current | 30 to +5 | mA | |
VOUT | Voltage applied to output in High output state | 0.5 to +VCC | V | |
IOUT | Current applied to output in Low output state | 74F711A, 74F712A | 96 | mA |
74F711-1, 74F712-1 | 10 | mA | ||
Tamb | Operating free-air temperature range | 0 to +70 | ||
Tstg | Storage temperature | 65 to +150 |
The 74F711A/74F711-1 consist of five 2-to-1 multiplexers designed for address multiplexing of dynamic RAMs and other multiplexing applications. The 74F711A has a common select (S) input, an Output Enable (OE) input and an Output Inverting (INV) input to control the 3-State outputs. The outputs source 15mA and sink 64mA. The 74F711-1 is the same as the 74F711A except that is has a 30 termination impedance on each output to reduce line noise and the 3-State outputs sink 5mA.
When the inverting input (INV) of the 74F711A is Low, the input data path is inverted.
To improve speed and noise immunity, VCC and GND side pins areused.
The 74F711A consist of five 3-to1 multiplexers designed for address multiplexing of dynamic RAMs and other multiplexing applications. The 74F712A has two select (S0, S1) inputs to determine which set of five inputs will be propagated to the five outputs. The outputs source 15mA and sink 64mA. The 74F711A is the same as the 74F712A except that it has a 30 termination impedance on each output to reduce line noise and the outputs sink 5mA.