Features: • Consists of five 2-to-1 Multiplexers• High impedance PNP base inputs for reduced loading (20mA in High and Low states)• Designed for address multiplexing of dynamic RAM and other applications• Output inverting/non-inverting option• 30 termination impedanc...
74F711-1: Features: • Consists of five 2-to-1 Multiplexers• High impedance PNP base inputs for reduced loading (20mA in High and Low states)• Designed for address multiplexing of dynamic RAM...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
SYMBOL | PARAMETER | RATING | UNIT | |
VCC | Supply voltage | 0.5 to +7.0 | V | |
VIN | Input voltage | 0.5 to +7.0 | V | |
IIN | Input current | 30 to +5 | mA | |
VOUT | Voltage applied to output in High output state | 0.5 to +VCC | V | |
IOUT | Current applied to output in Low output state | 74F711A, 74F712A | 96 | mA |
74F711-1, 74F712-1 | 10 | mA | ||
Tamb | Operating free-air temperature range | 0 to +70 | ||
Tstg | Storage temperature | 65 to +150 |
The 74F711A/74F711-1 consist of five 2-to-1 multiplexers designed for address multiplexing of dynamic RAMs and other multiplexing applications. The 74F711A has a common select (S) input, an Output Enable (OE) input and an Output Inverting (INV) input to control the 3-State outputs. The outputs source 15mA and sink 64mA. The 74F711-1 is the same as the 74F711A except that is has a 30 termination impedance on each output to reduce line noise and the 3-State outputs sink 5mA.
When the inverting input (INV) of the 74F711-1 is Low, the input data path is inverted.
To improve speed and noise immunity, VCC and GND side pins areused.
The 74F711-1 consist of five 3-to1 multiplexers designed for address multiplexing of dynamic RAMs and other multiplexing applications. The 74F711-1 has two select (S0, S1) inputs to determine which set of five inputs will be propagated to the five outputs. The outputs source 15mA and sink 64mA. The 74F712-1 is the same as the 74F711-1 except that it has a 30 termination impedance on each output to reduce line noise and the outputs sink 5mA.