56F8167

Features:

•Efficient 16-bit 56800E family controller engine with dual Harvard architecture
•Up to 60 Million Instructions Per Second (MIPS) at 60MHz core frequency
•Single-cycle 16 × 16-bit parallel Multiplier-Accumulator (MAC)
•Four 36-bit accumulators, including extension bits
•Arithmetic and logic multi-bit shifter
•Parallel instruction set with unique DSP addressing modes
•Hardware DO and REP loops
•Three internal address buses and one external address bus
•Four internal data buses and one external data bus
•Instruction set supports both DSP and controller functions
•Controller-style addressing modes and instructions for compact code
•Efficient C compiler and local variable support
•Software subroutine and interrupt stack with depth limited only by memory
•JTAG/EOnCE debug programming interface


Specifications

Characteristic	Symbol	Notes	Min	Max	Unit
Supply Voltage	VDD_IO		-0.3	4.0	V
ADC Supply Voltage	VDDA_ADC, VREFH	VREFH must be less than or equal to VDDA_ADC	-0.3	4.0	V
Oscillator / PLL Supply Voltage	VDDA_OSC_PLL		-0.3	4.0	V
Internal Logic Core Supply Voltage	VDD_CORE	OCR_DIS is High	-0.3	4.0	V
Input Voltage (digital)	VIN	Pin Groups 1, 2, 5, 6, 9, 10	-0.3	4.0	V
Input Voltage (analog)	VINA	Pin Groups 11, 12, 13	-0.3	4.0	V
Output Voltage	VOUT	Pin Groups 1, 2, 3, 5, 6, 7, 8	-0.3	4.0	V
Output Voltage (open drain)	VOD	Pin Group 4	-0.3	6.0	V
Ambient Temperature (Automotive)	TA		-40	125
Ambient Temperature (Industrial)	TA		-40	105
Junction Temperature (Automotive)	TJ		-40	150
Junction Temperature (Industrial)	TJ		-40	125
Storage Temperature (Automotive)	TSTG		-40	150
Storage Temperature (Industrial)	TSTG		-40	150

Description

The 56F8367 and 56F8167 are members of the 56800E core-based family of controllers. Each combines, on a single chip, the processing power of a Digital Signal Processor (DSP) and the functionality of a microcontroller with a flexible set of peripherals to create an extremely cost-effective solution. Because of its low cost, configuration flexibility, and compact program code, the 56F8367 and 56F8167 are well-suited for many applications. The 56F8167 includes many peripherals that are especially useful for motion control, smart appliances, steppers, encoders, tachometers, limit switches, power supply and control, automotive control (56F8367 only), engine management, noise suppression, remote utility metering, industrial control for power, lighting, and automation applications.

The 56800E core is based on a Harvard-style architecture consisting of three execution units operating in parallel, allowing as many as six operations per instruction cycle. The MCU-style programming model and optimized instruction set allow straightforward generation of efficient, compact DSP and control code. The instruction set of 56F8167 is also highly efficient for C/C++ Compilers to enable rapid development of optimized control applications.

The 56F8367 and 56F8167 support program execution from internal or external memories. Two data operands can be accessed from the on-chip data RAM per instruction cycle. These 56F8167 also providetwo external dedicated interrupt lines and up to 76 General Purpose Input/Output (GPIO) lines, depending on peripheral configuration.