28F640W30

Features: Flash Performance -70 ns Initial Access Speed -25 ns Page-Mode Read Speed -20 ns Burst-Mode Read Speed -Burst and Page Mode in All Blocks and across All Partition Boundaries -Enhanced Factory Programming: 3.5 µs per Word Program Time-Programmable WAIT Signal PolarityFlash Power -...

product image

28F640W30 Picture
SeekIC No. : 004218250 Detail

28F640W30: Features: Flash Performance -70 ns Initial Access Speed -25 ns Page-Mode Read Speed -20 ns Burst-Mode Read Speed -Burst and Page Mode in All Blocks and across All Partition Boundaries -Enhanced Fac...

floor Price/Ceiling Price

Part Number:
28F640W30
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/12/21

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

 Flash Performance
    -70 ns Initial Access Speed
    -25 ns Page-Mode Read Speed
    -20 ns Burst-Mode Read Speed
    -Burst and Page Mode in All Blocks and
       across All Partition Boundaries
    -Enhanced Factory Programming:
       3.5 µs per Word Program Time
    -Programmable WAIT Signal Polarity
 Flash Power
    -VCC = 1.70 V 1.90 V
    -VCCQ = 2.20 V 3.30 V
    -Standby Current = 6 µA (typ.)
    -Read Current = 7 mA
      (4 word burst, typ.)
 Flash Software
    -5/9 µs (typ.) Program/Erase Suspend Latency
    Time
   -Intel® Flash Data Integrator (FDI) and
      Common Flash Interface (CFI) Compatible
 Quality and Reliability
  -Operating Temperature:
     25 °C to +85 °C
   -100K Minimum Erase Cycles
   -0.18 µm ETOX™ VII Process
 Flash Architecture
   -Multiple 4-Mbit Partitions
   -Dual Operation: RWW or RWE
   -Parameter Block Size = 4-Kword
   -Main block size = 32-Kword
   -Top and Bottom Parameter Devices 
Flash Security
   -128-bit Protection Register: 64 Unique Device Identifier Bits; 64 User OTP Protection Register Bits
    -Absolute Write Protection with VPP at Ground
    -Program and Erase Lockout during Power Transitions
    -Individual and Instantaneous Block Locking/Unlocking with Lock-Down 
SRAM
    -70 ns Access Speed
    -16-bit Data Bus
    -Low Voltage Data Retention
    -S-VCC = 2.20 V 3.30 V 
Density and Packaging
    -32-Mbit Discrete in VF BGA Package
    -64-Mbit Discrete in µBGA* Package
    -56 Active Ball Matrix, 0.75 mm Ball-Pitch in µBGA* and VF BGA Packages
    -32/4-, 64/8- and 128/TBD- Mbit (Flash + SRAM) in a 80-Ball Stacked-CSP Package (14 mm x 8 mm)
    -16-bit Data Bus



Specifications

Parameter Note Maximum Rating
Temperature under Bias 25 °C to +85 °C
Storage Temperature
65 °C to +125 °C
Voltage On Any Signals (except VCC, VCCQ, VPP and S-VCC)
1
0.5 V to +3.80 V
VPP Voltage
1,2,3
0.2 V to +14 V
VCC Voltage
1
0.2 V to +2.40 V
VCCQ and S-VCC Voltage
1
0.2 V to +3.36 V
Output Short Circuit Current
4
100 mA



Description

28F640W30 combines state-of-the-art Intel®Flash technology with low power SRAM to provide the most versatile and compact memory solution for high performance, low power, board constraint memory applications.

The 1.8 Volt Intel Wireless Flash Memory with 3 Volt I/O offers a multi-partition, dual-operation flash architecture that enables the device to read from one partition while programming or erasing in another partition. This Read-While-Write or Read-While-Erase capability makes it possible to achieve higher data throughput rates as compared to single partition devices and it allows two processors to interleave code execution because program and erase operations can now occur as background processes.

28F640W30 incorporates a new Enhanced Factory Programming (EFP) mode to improve 12 V factory programming performance. This new feature helps eliminate manufacturing bottlenecks associated with programming high density flash devices. Compare the EFP program time of 3.5 µs per word to the standard factory program time of 8.0 µs per word and save significant factory programming time for improved factory efficiency.

Additionally, 28F640W30 includes block lock-down, programmable WAIT signal polarity and is supported by an array of software tools. All these features make this product a perfect solution for any demanding memory application.


Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Cables, Wires - Management
Boxes, Enclosures, Racks
Inductors, Coils, Chokes
Power Supplies - Board Mount
Transformers
View more