Specifications | Temperature | I |
| Voltage | 5.0 V |
| Package | TSSOP 20 |
| Speed | NA |
| Spread Spectrum | No |
| VCXO | Yes |
| Output Style | SE |
| Input Style | Crystal |
| Max. Output Frequency | 200 MHz |
| Min. Output Frequency | 0.314 MHz |
| Max. Input Frequency | 27 MHz |
| Min. Input Frequency | 5 MHz |
| Temp. Grade | C |
| Core Supply Voltage (VDD) | 3.3V |
| Output Supply Voltage (VDDO) | 1.8V - 3.3V |
| No. of Outputs | 6 |
| No. of Inputs | |
DescriptionTRIPLE PLL FIELD PROGRAMM
The ICS271 field programmable VCXO clock synthesizer generates up to six high-quality, high-frequency clock outputs including multiple reference clocks from a low-frequency crystal input. 271PGIT is designed to replace crystals and crystal oscillators inmost electronic systems.
Using the IDT VersaClock? software to configure PLLs and outputs, the ICS271 contains a One-Time Programmable (OTP) ROM for field programmability. Programming features include VCXO, eight selectable configuration registers and up to two sets of three low-skew outputs.
Each of the two output groups are powered by a separate VDDO voltage. VDDO may vary from 1.8 V to VDD. Using Phase-Locked Loop (PLL) techniques, 271PGIT runs from a standard fundamental mode, inexpensive crystal, or clock. It can replace VCXOs, multiple crystals and oscillators, saving board space and cost.
The ICS271 is also available in factory programmed custom versions for high-volume applications.
Packaged as 20-pin TSSOP
Eight addressable registers
Replaces multiple crystals and oscillators
Output frequencies up to 200 MHz at 3.3 V
Input crystal frequency of 5 to 27 MHz
Up to six reference outputs
Separate 1.8 to 3.3 V VDDO output level controls for each bank of 3 outputs
Up to two sets of three low-skew outputs
Operating voltages of 3.3 V
Controllable output drive levels
Advanced, low-power CMOS process
Available in Pb (lead) free packaging
click here for VersaClock Software page
271PGIT Data Sheet
