271PGILF

Specifications

Temperature I Voltage 5.0 V Package TSSOP 20 Speed NA Spread Spectrum No VCXO Yes Output Style SE Input Style Crystal Max. Output Frequency 200 MHz Min. Output Frequency 0.314 MHz Max. Input Frequency 27 MHz Min. Input Frequency 5 MHz Temp. Grade C Core Supply Voltage (VDD) 3.3V Output Supply Voltage (VDDO) 1.8V - 3.3V No. of Outputs 6 No. of Inputs


Description

TRIPLE PLL FIELD PROGRAMM
The ICS271 field programmable VCXO clock synthesizer generates up to six high-quality, high-frequency clock outputs including multiple reference clocks from a low-frequency crystal input. 271PGILF is designed to replace crystals and crystal oscillators inmost electronic systems.

Using the IDT VersaClock? software to configure PLLs and outputs, the ICS271 contains a One-Time Programmable (OTP) ROM for field programmability. Programming features include VCXO, eight selectable configuration registers and up to two sets of three low-skew outputs.

Each of the two output groups are powered by a separate VDDO voltage. VDDO may vary from 1.8 V to VDD. Using Phase-Locked Loop (PLL) techniques, 271PGILF runs from a standard fundamental mode, inexpensive crystal, or clock. It can replace VCXOs, multiple crystals and oscillators, saving board space and cost.

The ICS271 is also available in factory programmed custom versions for high-volume applications.

Packaged as 20-pin TSSOP

Eight addressable registers

Replaces multiple crystals and oscillators

Output frequencies up to 200 MHz at 3.3 V

Input crystal frequency of 5 to 27 MHz

Up to six reference outputs

Separate 1.8 to 3.3 V VDDO output level controls for each bank of 3 outputs

Up to two sets of three low-skew outputs

Operating voltages of 3.3 V

Controllable output drive levels

Advanced, low-power CMOS process

Available in Pb (lead) free packaging

click here for VersaClock Software page