24LLC16

`Two-wire serial interface 
`Automatic word address increment
`16 Kbits (2,048 bytes) storage area 
`16-byte page buffer 
`Typical 3 ms write cycle time with auto-erase function 
`Hardware-based write protection for the entire EEPROM (using the WP pin) 
`EEPROM programming voltage generated on chip 
`1,000,000 erase/write cycles 
`100 years data retention
`Operating voltage: 2.0 V to 5.5 V  
`Operating current
- Maximum write current: < 3 mA at 5.5 V
- Maximum read current: < 200 A at 5.5 V
- Maximum stand-by current: < 2 A at 2.0  
`Operating temperature range
- 25 to + 70 (commercia
- 40 to + 85 (industrial) 
`Operating clock frequencies
- 100 kHz at standard mode
- 400 kHz at fast mode 
`Electrostatic discharge (ESD)
- 5,000 V (HBM)  
- 400 V (MM)

The 24LLC16 serial EEPROM has a 16 Kbits (2,048 bytes) capacity, supporting the standard I²C^TM-bus serial interface. It is fabricated using CERAMATE!s most advanced CMOS technology. One of its major features is a hardware-based write protection circuit for the entire memory area. Hardware-based write protection is controlled by the state of the write-protect (WP) pin. Using one-page write mode, you can load up to 16 bytes of data into the EEPROM in a single write operation. Another significant feature of the 24LLC16 is its support for fast mode and standard mode.