2100TR

      The 2100TR is designed as a 2-wire photoelectronic smoke detector that uses a state-of-the-art optical sensing chamber. This detector also provides restorable, 135°F fixed-temperature heat detection.
      Some important electrical ratings of 2100TR have been concluded into several points as follow. The first one is about its system voltage (nominal) which would be 12 or 24 Vdc and the minimum would be 8.5 Vdc and the maximum would be 35 Vdc. The next one is about its maximum ripple voltage which would be 30% of nom. Voltage (peak to peak). The next one is about its standby current which would be 50 A average, 100 A maximum. The next one is about its alarm ratings which would be 25.5 mA minimum, 100 mA maximum. The next one is about its reset voltage which would be 1.3 Vdc minimum. The next one is about its reset time which would be 0.3 seconds maximum. The next one is about its start-up time which would be 30 seconds maximum (after 60 sec. reset). The next one is about its EOL relay which would be A77-716B, 12/24 Vdc. The next one is about its remote annunciator output which would be 7 mA maximum. The next one is about its auxiliary relay contact ratings which would be 1A @ 30 Vac. The next one is about its resistive load which would be 1A @ 30 Vdc. The next one is about 2100TR's special considerations which would means only one detector can be used per zone.
      Also there are some specifications about 2100TR. The first one is about its diameter which would be 5.5 inches (140 mm). The next one is about its height (including mounting bracket) which would be 1.7 inches (43 mm). The next one is about its weight which would be 6.8 oz. (190 g). The next one is about its operating temperature range which would be from 32° to 100° F (0° to 38°C). The next one is about 2100TR's operating humidity range which would be from 10% to 93% relative humidity, noncondensing. The next one is about its latching alarm which would mean reset by momentary power interruption. The next one is about its heat sensor which would be 135° F fixed temperature electronic thermistor. And so on. for more information please contact us.