Features: Max supply voltage V CC 41V Operating voltage range VCC 4.5 to 36V Max On-State resistance (per ch.) RON 50 mΩ Current limitation (typ) ILIMH 19 A Off state supply current IS 2 µA(*) Application All types of resis...
200807101811081763: Features: Max supply voltage V CC 41V Operating voltage range VCC 4.5 to 36V Max On-State resistance (per ch.) RON 50 mΩ Current limitation (typ) IL...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: • Choice of CMR performance of 10 kV/µs,5 kV/µs, and 100 V/µs...
Features: • Choice of CMR performance of 10 kV/µs, 5 kV/µs, and 100 V/µs...
Features: • Choice of CMR performance of 10 kV/µs,5 kV/µs, and 100 V/µs...
Max supply voltage |
V CC |
41V |
Operating voltage range |
VCC |
4.5 to 36V |
Max On-State resistance (per ch.) |
RON |
50 mΩ |
Current limitation (typ) |
ILIMH |
19 A |
Off state supply current |
IS
|
2 µA(*)
|
Parameter |
Symbol |
Value |
Units | ||
PENTAWATT | P2PAK | SO-16L | |||
DC supply voltage (Overvoltage protected) |
VCC |
45 |
V | ||
DC ground pin reverse current
TRAN Ground pin reverse current pulse duration < 1ms) |
VC |
- 0.3
|
MA
| ||
DC reverse ground pin current |
-IGND |
- 200 |
A | ||
DC output current |
IOUT |
Internally limited |
mA | ||
Reverse DC output current |
- IOUT |
- 21 |
mA | ||
DC input current |
IIN |
+/- 10 |
mA
| ||
Maximum switching energy (L=1.5mH; RL=0Ω; Vbat=13.5V; Tjstart=150°C; IOUT = IlimL(Typ.) ) |
ICSD |
51 |
mJ | ||
Electrostatic Discharge (Human Body Model: R=1.5K C=100pF) INPUT STATUS STAT_DIS OUTPUT V VCC CC |
-ICSENSE |
4000 4000 4000 5000 5000 |
V V V V V | ||
Junction Operating Temperature |
VESD |
750 |
°C | ||
Case operating temperature |
VESD |
- 40 to 150 |
°C | ||
Storage temperature |
Tj |
- 55 to 150 |
°C |
The VN5050J-E is a monolithic device made using STMicroelectronics VIPower technology. It is intended for driving resistive or inductive loads with one side connected to ground. Active V VCC CC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). The VN5050J-E detects open load condition both in on and off state, when STAT_DIS is left open or driven low.
Output shorted to V VCC CC is detected in the off state. When STAT_DIS is driven high, the STATUS pin is in a high impedance condition. Output current limitation protects the VN5050J-E in overload condition. In case of long duration overload, the VN5050J-E limits the dissipated power to safe level up to thermal shut-down intervention. Thermal shut-down with automatic restart allows the device to recover normal operation as soon as fault condition disappears..