Features: • Choice of CMR performance of 10 kV/µs, 5 kV/µs, and 100 V/µs• High speed: 10 Mbd typical• + 5 V CMOS compatibility• Guaranteed AC and DC performance over temperature:- 40 to + 100 °C Temp. Range• Pure tin leads• Meets IEC60068-2-42 ...
200807101759489684: Features: • Choice of CMR performance of 10 kV/µs, 5 kV/µs, and 100 V/µs• High speed: 10 Mbd typical• + 5 V CMOS compatibility• Guaranteed AC and DC perform...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: • Choice of CMR performance of 10 kV/µs,5 kV/µs, and 100 V/µs...
Features: • Choice of CMR performance of 10 kV/µs,5 kV/µs, and 100 V/µs...
Features: Max supply voltage V CC 41V Operating voltage range VCC 4.5 to ...
Symbol |
PARAMETER |
CONDITIONS
|
Unit |
Value |
IF |
Average forward current1) |
mA |
20 | |
IF |
Average forward current2) |
mA |
15 | |
VR |
Reverse input voltage |
V |
5 | |
VE |
Enable input voltage1) |
V |
VCC + 0.5 V | |
IE |
Power dissipation |
mA |
2 | |
IFSM |
Surge current |
t = 100 µs
|
mA |
200 |
Output | ||||
VCC |
Supply voltage |
1 minute max.
|
V |
7 |
IO |
Output current |
mA |
50 | |
VO |
Off state output terminal voltage |
V |
7 | |
PO |
Peak repetitive surge current |
mW |
85 | |
PO |
Power dissipation |
mW |
60 |
Tamb = 25 °C, unless otherwise specified Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute Maximum Rating for extended periods of the time can adversely affect reliability.
The 6N137, VO2601 and VO2611 are single channel 10 Mbd optocouplers utilizing a high efficient input LED coupled with an integrated optical photodiode IC detector. The detector has an open drain NMOS-transistor output, providing less leakage compared to anopen collector Schottky clamped transistor output. The VO2630, VO2631 and VO4661 are dual channel 10MBd optocouplers. For the single channel type, an enable function on pin 7 allows the detector to be strobed. The internal shield provides a guaranteed common mode transient immunity of 5 kV/µs for the VO2601 and VO2631 and 10 kV/µs for the VO2611 and VO4661. The use of a 0.1 µF bypass capacitor connected between pin 5 and 8 is recommended.