Published:2011/4/5 22:35:00 Author:Jessie | Keyword: start-up
View full Circuit Diagram | Comments | Reading(433)
Published:2011/4/5 22:45:00 Author:Jessie | Keyword: dashboards
View full Circuit Diagram | Comments | Reading(354)
Published:2011/3/22 22:59:00 Author:Jessie | Keyword: Proportion temperature regulator, integrated flip-flop
This circuit can be used to control the 5℃ to 35℃indoor temperature or other heating equipments. The maximum heating power depends on its thyristor,this one issuitable for 2kW power, and thyristor is BT139.
Temperature is controlledby the bridge road which composed by thermistors, resistance R1 and potentiometer Rp, the actual voltage and given voltage respectively adds on the U6 and U9 of integrated flip-flop TDA1023. If the room temperature is far belowthe given temperature,heating machine workswith all the power. If the room temperature is 1K differ from the given temperature,the proportional adjustment will be achieved.
(View)
View full Circuit Diagram | Comments | Reading(2443)
Published:2011/3/22 23:00:00 Author:Jessie | Keyword: temperature regulator circuit, schmitt toggle
Temperature sensor adopts thermal resistor, it's inside measure current approximates constant measuring current. At low temperatures, thermistors's over voltage is high,current flows through the transistor onthe left of Schmitt toggle, and relay release. The heating device which has to be adjusted should contact relay's closed point too. (View)
View full Circuit Diagram | Comments | Reading(715)
Published:2011/3/21 1:26:00 Author: | Keyword: RLD network
We can see from the table, relatively with parallel RCD network is series RLD network, this network is a polar opening absorption circuit. The components of RLD network are: Lv inductor and an Rv-Dv series branch parallel as shown.
absorber circuit
nonpolarity absorber circuit
heteropolarity absorber circuit
turn off absorb
Parallel Cv, du v/dt=Io/Cv
Parallel RCD(Rv, Dv Parallel, and serial with Cv)
open up absorb
serial Lv, di v/dt=Ui/Lv
serial RLD(Rv, Dv in serial, and Parallel with Lv)
The role of Rv-Dv series branch is in the process of shut off the switching tube, the electric energy stored in Lv can be released through the Rv-Dv series slip, avoided the switching tube was damaged due to the high voltage.
(View)
View full Circuit Diagram | Comments | Reading(543)
Published:2011/3/31 2:42:00 Author:Nicole | Keyword: vacuum cleaner
The vacuum cleaner uses controllable silicon components to form timing circuit, it can control the motor speed according to needs of the size of suction pipe fortune. The timing circuit as below is comparative maturity, it is widely used in high grade and high power vacuum cleaner.
(View)
View full Circuit Diagram | Comments | Reading(5518)
Published:2011/4/1 1:30:00 Author:Nicole | Keyword: car wiper, timing
View full Circuit Diagram | Comments | Reading(326)
Published:2011/4/1 1:48:00 Author:Nicole | Keyword: sequential timer
The 556 double timer transports the first half to the latter half by 0.001μF coupling capacitance, giving a total delay which is equal to the sum of single delay. The moment of 6-pin grounding can start the first half of timer. After determining the time interval by 1.1R1C1, the second timer starts delaying, the value is decided by 1.1R2C2.
(View)
View full Circuit Diagram | Comments | Reading(1770)
Published:2011/4/2 2:16:00 Author:Nicole | Keyword: Electronic clock
View full Circuit Diagram | Comments | Reading(619)
Published:2011/4/2 2:19:00 Author:Nicole | Keyword: short-circuit protector, relay
View full Circuit Diagram | Comments | Reading(884)
Published:2011/4/2 2:22:00 Author:Nicole | Keyword: motor speed control
View full Circuit Diagram | Comments | Reading(1483)
Published:2011/4/2 2:29:00 Author:Nicole | Keyword: electric fan, stepless speed regulation
View full Circuit Diagram | Comments | Reading(842)
Published:2011/4/2 2:34:00 Author:Nicole | Keyword: electric heater, temperature control
View full Circuit Diagram | Comments | Reading(1285)
Published:2011/4/2 2:51:00 Author:Nicole | Keyword: control integrated circuit
The RT in figure can be chosen between 5kΩ~5MΩ. Considering operate easily and linearity, it is better to choose 250kΩ~1MΩ. The preferred value of CT is over 0.01pF, and the minimum value should not lower than 3 900pF according to the manufacturer's recommendations.
(View)
View full Circuit Diagram | Comments | Reading(1526)
Published:2011/4/2 2:55:00 Author:Nicole | Keyword: constant source, charging timer
View full Circuit Diagram | Comments | Reading(712)
Published:2011/4/2 2:57:00 Author:Nicole | Keyword: intelligent battery, control chip
View full Circuit Diagram | Comments | Reading(2277)
Published:2011/4/2 3:17:00 Author:Nicole | Keyword: timer
This timer circuit can provide 20min counting time delay. It is a normal decline oscillator with FET current source. Resistance R1 provides reverse migration to the door of JFET transform into power supply. It colses JFET and delays the charging time of C1. C1 is a low drain capacitance similar to polyester resin.
(View)
View full Circuit Diagram | Comments | Reading(1025)
Published:2011/4/6 2:38:00 Author:Nicole | Keyword: pin arrangement
LTC732 is a lithium ion battery constant current/ constant voltage linear charge controller, it is produced by Linear Technology company. It also can constant current charge to nicad and Ni-MH battery, the pins arrangement diagram is shown as below:
The internal structure is shown as below:
(View)
View full Circuit Diagram | Comments | Reading(630)
Published:2011/4/2 3:42:00 Author:Nicole | Keyword: electronic governor
View full Circuit Diagram | Comments | Reading(1764)
Published:2011/4/2 3:45:00 Author:Nicole | Keyword: Ni-Cd battery, charge control, integrated circuit
View full Circuit Diagram | Comments | Reading(659)
Pages:2168/2234 At 2021612162216321642165216621672168216921702171217221732174217521762177217821792180Under 20 |