PolymerVision Rollable Display Technology Shows Animated Images

Published:2012/1/29 21:36:00 Author:Amy From:SeekIC

PolymerVision’s rollable 6-in. display technology can display animated images at a 10-Hz refresh rate. Potential applications include ITO replacement, printed TFTs, and printed emissive or reflective displays. These displays enable users to roll an unbreakable large screen from a tightly rolled scroll, plugging the market gap between higher-volume mobile screens and lower-volume laptop or desktop screens. A proprietary debonding process releases the 0.1-mm-thick, 7g display from the substrate without damage. A proven and mature organic TFT technology currently drives the displays. Mobility values range from 0.2 to 0.3 cm²/V. Turn-on voltage is approximately 0V, resulting in low-voltage and low-power operation. The devices are encapsulated from the ambient environment to improve their stability during operation. The initial products have reflective electrophoretic displays, which minimize power consumption and are more tolerant of variations in the TFT-backplane process.

Polymer Vision was founded as an independent company in 2006 as a spin out from Philips Electronics. In 2009 Polymer Vision became a subsidiary of Wistron, one of the world’s leading ODMs. With a Mission "to put a rollable display in every mobile device" Polymer Vision is at the forefront of an exciting new era in the dynamic market of mobile consumer devices. Over the past years the company has pioneered major technology breakthroughs, including demonstrating a fully functional rollable display enabled e-Reader device.

Reprinted Url Of This Article: http://www.seekic.com/blog/IndustryNews/2012/01/29/PolymerVision_Rollable_Display_Technology_Shows_Animated_Images.html

Print this Page | Comments | Reading(681)