© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:TOSHIBA Pack:ZIP-10 D/C:2001 Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
Mfg:TOSHIBA Pack:ZIP Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:MPS Pack:SIP Vendor:Other Category:Other
Mfg:TOSHIBA Pack:ZIP Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The MP400 is a "board-level module" power op amp that integrates the performance of a high speed op amp with a switch mode power supply. The result is a high voltage driver that delivers adjustable output voltages from 5...
Vendor:Other Category:Other
The MP3908 is a flexible current-mode PWM controller optimized for power-supply applications. The MP3908 features resistor-programmable dead-time control to optimize efficiency for a broad number of different configurati...
Vendor:Other Category:Other
The MP3900 is a boost controller that drives an external MOSFET capable of handling 10A current. It has an operational current of typically 180A and can accommodate off-line, Telecom and non-isolated applications. Intern...
Vendor:Other Category:Other
The MP39 is a cost-effective high voltage MOSFET power operational amplifier constructed with surface mount components on a thermally conductive but electrically isolated substrate. While the cost is low the MP39 offers ...
Vendor:Other Category:Other
The MP38 is a cost-effective high voltage MOSFET power operational amplifier constructed with surface mount components on a thermally conductive but electrically isolated substrate.While the cost is low the MP38 offers m...
Vendor:Other Category:Other
The MP38894 is a monolithic step-down switch mode converter with a built in internal power MOSFET. It achieves 4.5A continuous output current over a wide input supply range with excellent load and line regulation.Current...
Vendor:Other Category:Other
The MP38892 is a monolithic step-down switch mode converter with a built in, internal high-side power MOSFET. It achieves 6A continuous output current over a wide input supply range with excellent load and line regulatio...
Vendor:Other Category:Other
The MP38876 is a monolithic step-down switch mode converter with a built in internal power MOSFET. It achieves 15A continuous output current over a wide input supply range with excellent load and line regulation. Current...
Vendor:Other Category:Other
The MP38875 is a monolithic step-down switch mode converter with a built in internal power MOSFET. It achieves 15A continuous output current over a wide input supply range with excellent load and line regulation. Current...
Vendor:Other Category:Other
The MP38874 is a monolithic step-down switch mode converter with a built in internal power MOSFET. It achieves 8A continuous output current over a wide input supply range with excellent load and line regulation.Current m...
Vendor:Other Category:Other
The MP38873 is a monolithic step-down switch mode converter with a built in internal power MOSFET. It achieves 15A continuous output current over a wide input supply range with excellent load and line regulation. Current...
Vendor:Other Category:Other
The MP38872 is a monolithic step-down switch mode converter with a built in high-side internal power MOSFET and a gate driver for a low-side external MOSFET. It achieves 6A continuous output current over a wide input sup...
Vendor:Other Category:Other
The MP38870 is a monolithic step-down switch mode converter with a built in internal high-side power MOSFET. It achieves 3A continuous output current over a wide input supply range with excellent load and line regulation...
Vendor:Other Category:Other
The MP38671 is a monolithic step-down switch mode converter with a built in internal power MOSFET. It achieves 10A continuous output current over a wide input supply range with excellent load and line regulation.Current ...
Vendor:Other Category:Other
The MP3801 is a high output voltage, DC to AC converter designed for driving Electroluminescent (EL) lamps of up to 5 square inches. The device operates from an input voltage range of 2.5V to 5.5V, making it suitable for...
Vendor:Other Category:Other
The MP38 is a cost-effective high voltage MOSFET power operational amplifier constructed with surface mount components on a thermally conductive but electrically isolated substrate. While the cost is low the MP38 offers ...
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:MP D/C:08+ Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:RECTRON D/C:07+ Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:RECTRON D/C:07+ Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Pack:CAN D/C:09+ Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:CAN Pack:MP D/C:86 Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The MP3410 is a highly efficient, synchronous, fixed frequency, current-mode step-up converter with output to input disconnect, inrush current limiting and internal soft-start. It includes an error amplifier, ramp genera...
Vendor:Other Category:Other
The MP3388 is a step-up converter with 8-channel current sources designed for driving the white LED arrays for large size LCD panel backlighting applications. The MP3388 uses current mode, fixed frequency architecture. T...
Vendor:Other Category:Other
The MP3352 is a fast, highly efficient, precision high-voltage photo-flash charger with integrated IGBT driver for xenon flash applications. The programmable peak current is up to 2.5A to ensure fast charging time. A 200...
Vendor:Other Category:Other
The MP3351 is a fast, highly efficient, precision high voltage photo-flash charger with integrated IGBT driver for xenon flash applications. The programmable peak current from 300mA to 2A. A 200mΩ internal power sw...
Vendor:CUI Inc Category:Connectors
CONN 3.5MM MALE MONO PHONE PLUG
Vendor:Other Category:Other
The MP3305 is a monolithic step-up converter designed for driving arrays of WLEDs from 5V input or a single cell Lithium Ion battery. The MP3305 uses current mode, fixed frequency architecture to regulate the LED current...
Vendor:Other Category:Other
The MP3304 is a monolithic step-up converter designed for driving arrays of WLEDs from 5V input or a single cell Lithium Ion battery. It uses current mode, fixed frequency architecture to regulate the LED current, which ...
Mfg:MPS D/C:07+ Vendor:Other Category:Other
The MP3302 is a step-up converter designed for driving up to 27 white LEDs, 3 WLEDs in series 9 strings, all from a single cell Lithium Ion battery. The MP3302 uses current mode, fixed frequency architecture to regulate ...
Vendor:Other Category:Other
The MP3276 is a complete 16-channel, 12-bit Data Acquisition Subsystem with 3-state output buffers for direct interfacing to 16-bit microprocessor buses. Implemented using an advanced BiCMOS process, the converter MP3276...
Mfg:msi Pack:msi D/C:dc93 Vendor:Other Category:Other
The MP3275 is a complete 16-channel, 12-bit Data Acquisition Subsystem with serial data port. Implemented using an advanced BiCMOS process, the MP3275 combines a 16-channel passive overvoltage-protected multiplexer instr...
Mfg:MAXIM Pack:PLCC68 D/C:07/08+ Vendor:Other Category:Other
The MP3274 is a complete 32-channel, 12-bit Data Acquisition Subsystem with 3-state output buffers for direct interfacing to 16-bit microprocessor buses. Implemented using an advanced BiCMOS process, the MP3274 combines ...
Vendor:CUI Inc Category:Connectors
CONN 2.5MM MALE PHONE PLUG
Vendor:Other Category:Other
The MP3213 is a current mode step up converter with a 3.5A, 0.18 internal switch to provide a highly efficient regulator with fast response. The MP3213 operates at 700KHz or 1.3MHz allowing for easy filtering and low noi...
Vendor:Other Category:Other
The MP3209 is a current mode step up converter intended for small, low power applications. The MP3209 switches at 1.4MHz and allows the use of tiny, low cost capacitors and inductors to achieve a solution less than 1mm i...
Vendor:Other Category:Other
The MP3208 is a 5-pin TSOT23 step-up converter designed for driving up to six (6) series white LEDs from a single-cell Lithium Ion battery. The MP3208 uses a current limited, variable frequency architecture to regulate t...
Pack:TOST23-5 D/C:08+ Vendor:Other Category:Other
The MP3205 is a step-up converter designed for driving up to 5 series white LEDs from a single cell Lithium Ion battery. The MP3205 uses current mode, fixed frequency architecture to regulate the LED current, which is me...
Mfg:MPS D/C:08+ Vendor:Other Category:Other
The MP3204 is a step-up converter designed for driving up to 5 series white LEDs from a single cell Lithium Ion battery. The MP3204 uses current mode, fixed frequency architecture to regulate the LED current, which is me...
Vendor:Other Category:Other
The MP3202DJ-LF-Z is one member of the MP3202 family which is designed as the low pass filter array with integrated TVS diodes for ESD protection. MP3202DJ-LF-Z effectively replaces 10 discrete components in a small SC-8...
Mfg:TOSHIBA D/C:ZIP Vendor:Other Category:Other
The MP3302 is a step-up converter designed for driving up to 27 white LEDs, 3 WLEDs in series 9 strings, all from a single cell Lithium Ion battery. The MP3302 uses current mode, fixed frequency architecture to regulate ...
Vendor:Other Category:Other
The MP3201 is a constant frequency, 5-pin TSOT23 current mode step up converter intended for small, low power applications. The switches at 1.1MHz and allows the use of tiny, low cost capacitors and inductors 2mm or less...
Vendor:Other Category:Other
The MP3115 is a synchronous, fixed frequency, current mode step-up converter with output-to- input disconnect optimized to boost a single AA Alkaline battery to 2.5V or 3.3V. MP3115 can startup from an input voltage as l...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The MP3021 is a WLED driver that can drive up to 4 backlight WLEDs at up to 30mA each. Backlight brightness can be adjusted with a 5 bit register plus one bit for precise low brightness control.The MP3021 employs a super...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The MP3011 is a fully automatic driver for powering two white LEDs, with up to 4V forward voltage, from a single Li-Ion or three NiMH cells. The driver performs all of the sensing and control to run the LEDs at an optimu...
Vendor:Other Category:Other
Mfg:TOSHIBA Vendor:Other Category:Other
The MP3001 is a dual function WLED driver intended for camera phone applications. It can drive up to 4 backlight WLEDs at up to 30mA each and a flash WLED at up to 250mA. Backlight brightness can be adjusted with a 5 bit...
Pack:3*3QFN16 D/C:08+ Vendor:Other Category:Other
The MP3000 is a fully automatic driver that powers four white LEDs with up to 4V forward voltage from a single Li-Ion or three NiMH cells. The driver performs all of the sensing and control to run the LEDs at an optimum ...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
© 2008-2012 SeekIC.com Corp.All Rights Reserved.