Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The TSL201R linear sensor array consists of a 64 × 1 array of photodiodes and associated charge amplifier circuitry. The pixels measure 120 mm (H) by 70 mm (W) with 125-mm center-to-center spacing and 55-mm spacing between pixels. Operation is simplified by internal control logic that requires only a serial-input (SI) signal and a clock.
The TSL201R is intended for use in a wide variety of applications including mark detection and code reading, optical character recognition (OCR) and contact imaging, edge detection and positioning as well as optical linear and rotary encoding.
† Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "Recommended Operating Conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
TSL201R Features
64 * 1 Sensor-Element Organization 200 Dots-Per-Inch (DPI) Sensor Pitch High Linearity and Uniformity Wide Dynamic Range . . . 2000:1 (66 dB) Output Referenced to Ground Low Image Lag . . . 0.5% Typ Operation to 5 MHz Single 5-V Supply Replacement for TSL201
TSL201R Connection Diagram
TSL202R General Description
The TSL202R linear sensor array consists of two sections of 64 photodiodes and associated charge amplifier circuitry arranged to form a contiguous 128 × 1 array. The pixels measure 120 mm (H) by 70 mm (W) with 125-mm center-to-center spacing and 55-mm spacing between pixels. Operation is simplified by internal control logic that requires only a serial-input (SI) signal and a clock.
The TSL202R is intended for use in a wide variety of applications including mark detection and code reading, optical character recognition (OCR) and contact imaging, edge detection and positioning as well as optical linear and rotary encoding.
TSL202R Maximum Ratings
Supply voltage range, VDD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.3 V to 6 V Input voltage range, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.3 V to VDD + 0.3V Input clamp current, IIK (VI < 0 or VI > VDD) . . . . . . . . . . . . . . . . 20 mA to 20 mA Output clamp current, IOK (VO < 0 or VO > VDD) . . . . . . . . . . . . .25 mA to 25 mA Voltage range applied to any output in the high impedance or power-off state, VO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.3 V to VDD + 0.3V Continuous output current, IO (VO = 0 to VDD) . . . . . . . . . . . . . . .25 mA to 25 mA Continuous current through VDD or GND . . . . . . . . . . . . . . . . . . . . 40 mA to 40 mA Analog output current range, IO . . . . . . . . . . . . . . . . . . . . . . . . . . .25 mA to 25 mA Operating free-air temperature range, TA . . . . . . . . . . . . . . . . . . . 25°C to 85°C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . .25°C to 85°C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . ..260°C ESD tolerance, human body model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2000 V
TSL202R Features
· 128 × 1 Sensor-Element Organization · 200 Dots-Per-Inch (DPI) Sensor Pitch · High Linearity and Uniformity · Wide Dynamic Range . . . 2000:1 (66 dB) · Output Referenced to Ground · Low Image Lag . . . 0.5% Typ · Operation to 5 MHz · Single 5-V Supply · Replacement for TSL202
TSL208R General Description
The TSL208R linear sensor array consists of a 512 × 1 array of photodiodes and associated charge amplifier circuitry. The pixels measure 120 mm (H) by 70 mm (W) with 125-mm center-to-center spacing and 55-mm spacing between pixels. Operation is simplified by internal control logic that requires only a serial-input (SI) signal and a clock.
The TSL208R is intended for use in a wide variety of applications including mark detection and code reading, optical character recognition (OCR) and contact imaging, edge detection and positioning as well as optical linear and rotary encoding.
† Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "Recommended Operating Conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
TSL208R Features
512 * 1 Sensor-Element Organization 200 Dots-Per-Inch (DPI) Sensor Pitch High Linearity and Uniformity Wide Dynamic Range . . . 2000:1 (66 dB) Output Referenced to Ground Low Image Lag . . . 0.5% Typ Operation to 5 MHz Single 5-V Supply Replacement for TSL208