Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The TPA2035D1 is a 2.75-W high efficiency filter-free class-D audio power amplifier in an approximately 1.5-mm * 1.5-mm wafer chip scale package (WCSP) that requires only one external component. The pinout is the same as the TPA2010D1 (SLOS417) except that the external gain setting input resistors required by the TPA2010D1 are integrated into the fixed gain of the TPA2035D1.
Features like 75dB PSRR and improved RF-rectification immunity with a small PCB footprint (WCSP amplifier plus single decoupling cap) make the TPA2035D1 ideal for wireless handsets. A fast start-up time of 3.2 ms with minimal pop makes the TPA2035D1 ideal for PDA applications.
In wireless handsets, the earpiece, speaker phone, and melody ringer can each be driven by the TPA2035D1. The TPA2035D1 has a low 27-mV noise floor, A-weighted.
TPA2035D1 Maximum Ratings
TPA2035D1
VDD
Supply voltage
In active mode
0.3 V to 6 V
In SHUTDOWN mode
0.3 V to 7 V
VI
Input voltage
0.3 V to VDD + 0.3 V
Continuous total power dissipation
See Dissipation Rating Table
TA
Operating free-air temperature
40 to 85
TJ
Operating junction temperature
40 to 125
Tstg
Storage temperature
65 to 150
ESD
Electro-Static Discharge Tolerance - Human Body Model (HBM) for all pins(2)
2KV
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) The output pins Vo and Vo+ are tolerant to 1.5KV HBM ESD
TPA2035D1 Features
` Maximize Battery Life and Minimize Heat 0.5-A Shutdown Current 3-mA Quiescent Current High Efficiency Class-D 88% at 400mW at 8 80% at 100mW at 8 ` Short Circuit Auto-recovery ` Gain of 2 V/V (6dB) ` Only One External Component Required Internal Matched Input Gain and Feedback Resistors for Excellent PSRR and CMRR Optimized PWM Output Stage Eliminates LC Output Filter PSRR (75 dB) and Wide Supply Voltage (2.5 V to 5.5 V) Eliminates Need for a Dedicated Voltage Regulator Fully Differential Design Reduces RF Rectification and Eliminates Bypass Capacitor CMRR (69 dB)Eliminates Two Input Coupling Capacitors ` Thermal and Short-Circuit Protection ` Pinout Similar to the TPA2010D1 ` Wafer Chip Scale Packaging (WCSP) NanoFree™ (YZF)
TPA2035D1 Typical Application
· Wireless Handsets, PDAs, and other mobile devices
TPA2035D1YZFR Parameters
Technical/Catalog Information
TPA2035D1YZFR
Vendor
Texas Instruments (VA)
Category
Integrated Circuits (ICs)
Package / Case
9-DSBGA
Type
Class D
Output Type
1-Channel (Mono)
Voltage - Supply
2.5 V ~ 5.5 V
Packaging
Cut Tape (CT)
Features
Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown