Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The 29VE020 is a 256K x 8 CMOS page mode EEPROM manufactured with SST's proprietary, high performance CMOS SuperFlash technology. The split gate cell design and thick oxide tunneling injector attain better reliability and manufacturabi lity compared with alternate approaches. The 29VE020 writes with a 2.7-volt-only power supply. (VCC: 2.7V to 3.6V) Internal erase/program is transparent to the user. The 29VE020 conforms to JEDEC standard pinouts for byte-wide memories.
Featuring high performance page write, the 29VE020 provides a typical byte-write time of 39 sec. The entire memory, i.e., 256K bytes, can be written page by page in as little as 10 seconds, when using interface features such as Toggle Bit or Data# Polling to indicate the completion of a write cycle. To protect against inadvertent write, the 29VE020 has on-chip hardware and software data protection schemes. Designed, manufactured, and tested for a wide spectrum of applications, the 29VE020 is offered with a guaranteed page-write endurance of 104 or 103 cycles. Data retention is rated at greater than 100 years.
The 29VE020 is suited for applications that require convenient and economical updating of program,configuration, or data memory. For all system applications, the 29VE020 significantly improves performance and reliability, while lowering power consumption, when compared with 5-volt EEPROM or EPROM approaches. The 29VE020 improves flexibility while lowering the cost for program,data, and configuration storage applications.
To meet high density, surface mount requirements,the 29VE020 is offered in 32-pin TSOP and 32-lead PLCC packages. A 600-mil, 32-pin PDIP package is also available. See Figures 2A and 2B for pinouts.
SST29VE020 Maximum Ratings
Temperature Under Bias ........................................................................................ -55 to +125 Storage Temperature ............................................................................................. -65 to +150 D. C. Voltage on Any Pin to Ground Potential .................................................... -0.5V to VCC+0.5V Transient Voltage (<20 ns) on Any Pin to Ground Potential .............................. -1.0V to VCC+1.0V Voltage on A9 Pin to Ground Potential ..................................................................... -0.5V to 14.0V Package Power Dissipation Capability (Ta = 25) ................................................................. 1.0W Through Hole Lead Soldering Temperature (10 Seconds) ...................................................... 300 Surface Mount Lead Soldering Temperature (3 Seconds) ...................................................... 240 Output Short Circuit Current(1) ........................................................................................... 100 mA
SST29VE020 Features
Single 2.7-Volt Read and Write Operations CMOS SuperFlash EEPROM Technology -Endurance: 100,000 Cycles (typical) -Greater than 100 years Data Retention Low Power Consumption: -Active Current: 10 mA (typical) -Standby Current: 10 A (typical) Fast Page-Write Operation -128 Bytes per Page, 1024 Pages -Page-Write Cycle: 5 ms (typical) -Complete Memory Rewrite: 5 sec (typical) -Effective Byte-write Cycle Time: 39 s (typical) Fast Access Time: 200 and 250 ns Latched Address and Data Automatic Write Timing with Internal -Vpp Generation End of Write Detection -Toggle Bit -Data# Polling Hardware and Software Data Protection TTL I/O Compatibility JEDEC Standard Byte-wide EEPROM Pinouts Packages Available -32-Pin TSOP -32-Lead PLCC -32 Pin Plastic DIP