Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The SST25VF512A-33-4C is one member of the SST serial flash family which features a four-wire, SPI-compatible interface that allows for a low pin-count package occupying less board space and ultimately lowering total system costs. This device is accessed through the SPI (serial peripheral interface) bus compatible protocol and supports both mode 0 (0,0) and mode 3 (1,1) of SPI bus operations.
Features of the SST25VF512A-33-4C are:(1)single 2.7-3.6V read and write operations;(2)superior reliability:endurance--100,000 cycles (typical) and greater than 100 years data retention;(3)serial interface architecture--SPI compatible:mode 0 and mode 3;(4)33 MHz max clock frequency;(5)low power consumpt-ion:active read current--7 mA (typical) or standby current:8 A (typical);(6)all non-Pb (lead-free) devices are RoHS compliant;(7)software write protection: write protection through Block-Protection bits in status register;(8)write protection (WP#):enables/disables the Lock-Down function of the status register;(9)hold pin (HOLD#):suspends a serial sequence to the memory without deselecting the device;(10)end-of-write detection:software status;(11)auto address increment (AAI) programming:decrease total chip programming time over byte-program operations.
The absolute maximum ratings of the SST25VF512A-33-4C can be summarized as:(1)temperature under bias:-55°C to +125°C;(2)storage temperature:-65°C to +150°C;(3)D. C. voltage on any pin to ground potential:-0.5V to VDD+0.5V;(4)transient voltage (<20 ns) on any pin to ground potential:-2.0V to VDD+2.0V;(5)package power dissipation capability (TA=25°C):1.0 W;(6)surface mount solder reflow temperature:260°C for 10 seconds;(7)output short circuit current:50 mA. If you want to know more information such as the electrical characteristics about the SST25VF512A-33-4C, please download the datasheet in www.seekic.com or www.chinaicmart.com .