Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
Ambient temperature under bias (TA) ............................ 40 to 125 °C Storage temperature (Tstg) ..................................... 65 °C to 150 °C Voltage on VCC pins with respect to ground (VSS) ......... 0.5 V to 6.5 V Voltage on any pin with respect to ground (VSS) ... 0.5 V to VCC +0.5 V Input current on any pin during overload condition..... 10 mA to 10 mA Absolute sum of all input currents during overload condition ... I 100 mA I Power dissipation................................................................................ TBD Note: Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage of the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for longer periods may affect device reliability. During overload conditions (VIN > VCC or VIN < VSS) the Voltage on VCC pins with respect to ground (VSS) must not exceed the values defined by the absolute maximum ratings.
SAB-C517A-LM Features
• Full upward compatibility with SAB 80C517A/83C517A-5 • Up to 24 MHz external operating frequency 500 ns instruction cycle at 24 MHz operation • Superset of the 8051 architecture with 8 datapointers • On-chip emulation support logic (Enhanced Hooks Technology TM) • 32K byte on-chip ROM (with optional ROM protection) alternatively up to 64K byte external program memory • Up to 64K byte external data memory • 256 byte on-chip RAM • Additional 2K byte on-chip RAM (XRAM) • Seven 8-bit parallel I/O ports • Two input ports for analog/digital input • Two full duplex serial interfaces (USART) 4 operating modes, fixed or variable baud rates programmable baud rate generators • Four 16-bit timer/counters Timer 0 / 1 (C501 compatible) Timer 2 for 16-bit reload, compare, or capture functions Compare timer for compare/capture functions • Powerful 16-bit compare/capture unit (CCU) with up to 21 high-speed or PWM output channels and 5 capture inputs • 10-bit A/D converter 12 multiplexed analog inputs Built-in self calibration • Extended watchdog facilities 15-bit programmable watchdog timer Oscillator watchdog • Power saving modes Slow down mode Idle mode (can be combined with slow down mode) Software power-down mode Hardware power-down mode • 17 interrupt sources (7 external, 10 internal) selectable at 4 priority levels • P-MQFP-100 packages • Temperature Ranges: SAB-C517A TA = 0 to 70 °C SAF-C517A TA = -40 to 85 °C SAH-C517A TA = -40 to 110 °C