Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The REG102 is a family of low-noise, low-dropout linear regulators with low ground pin current. The new DMOS topology provides significant improvement over previous designs, including low-dropout voltage (only 150mV typ at full load), and better transient performance. In addition, no output capacitor is required for stability, unlike conventional low-dropout regulators that are difficult to compensate and require expensive low ESR capacitors greater than 1F.
Typical ground pin current is only 600A (at IOUT = 250mA) and drops to 10nA when not enabled. Unlike regulators with PNP pass devices, quiescent current remains relatively constant over load variations and under dropout conditions.
The REG102 has very low output noise (typically 28Vrms for VOUT = 3.3V with CNR = 0.01F), making it ideal for use in portable communications equipment. On-chip trimming results in high output voltage accuracy. Accuracy is maintained over temperature, line, and load variations. Key parameters are tested over the specified temperature range (40 to +85).
The REG102 is well protected-internal circuitry provides a current limit that protects the load from damage; furthermore, thermal protection circuitry keeps the chip from being damaged by excessive temperature. The REG102 is available in SOT23-5, SOT223-5, and SO-8 packages.
REG102 Maximum Ratings
Supply Input Voltage, VIN
0.3V to 12V
Enable Input
0.3V to VIN
Output Short-Circuit Duration
Indefinite
Operating Temperature Range (TJ)
55 to +125
Storage Temperature Range (TA)
65 to +150
Lead Temperature (soldering, 3s)
+240
NOTE: (1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability.
REG102 Features
` NEW DMOS TOPOLOGY: Ultra Low Dropout Voltage: 150mV typ at 250mA Output Capacitor not Required for Stability ` FAST TRANSIENT RESPONSE ` VERY LOW NOISE: 28Vrms ` HIGH ACCURACY: ±1.5% max ` HIGH EFFICIENCY: IGND = 600A at IOUT = 250mA Not Enabled: IGND = 0.01A ` 2.5V, 2.8V, 2.85V, 3.0V, 3.3V, AND 5.0V ADJUSTABLE OUTPUT VERSIONS ` OTHER OUTPUT VOLTAGES AVAILABLE UPON REQUEST ` FOLDBACK CURRENT LIMIT ` THERMAL PROTECTION ` SMALL SURFACE-MOUNT PACKAGES: SOT23-5, SOT223-5, and SO-8
REG102 Typical Application
· PORTABLE COMMUNICATION DEVICES · BATTERY-POWERED EQUIPMENT · PERSONAL DIGITAL ASSISTANTS · MODEMS · BAR-CODE SCANNERS · BACKUP POWER SUPPLIES